Cooper B-Line B-line Series Product Information Packet

B-LINE
SERIES
Fasteners
Ruff-IN™
RUFFIN-17
pre-fab systems
Ruff-IN™ Products
Telescoping brackets
Completely adjustable, fits a range of stud spacing
Mounts 11⁄2", 21⁄8", 21⁄2", and 213⁄16 " deep boxes
Increased rigidity through center groove design
Only two screws required to mount 11⁄2" and 21⁄8" box
depths
Pre-punched screw holes provide for easy box installation
Bar is marked with a scale for stud spacing
Finish: Pre-galvanized
UPC/Part Catalog Box
Number Number Stud Spacing Qty.
799038 63001 BB2-16T 11" to 18" 50
799038 63002 BB2-24T 151⁄2" to 26" 50
Patent Pending
BB2-16T
BB2-24T
Box mounting clip
Allows for pre-fabrication of the electrical box prior to
installing the box onto the bracket
Tool-less, simply installs by snapping onto the bracket and requires no hardware to secure
UPC/Part Catalog
Number Number Qty
799038 63003 BB2TSC Box Mounting Clip 100
Patent Pending
Description
Box
Shown mounted on box
2
Notes: Read safety/installation instruction sheet in packages before use.
Ruff-IN™ Products
Floor mount box supports
•  BBF floorstand provides the most rigid support in the
industry
•  Far-side support accomodates 6", 51⁄2", 35⁄8", and 21⁄2" stud
depths
•  Fold-out tab built-in to attach floor stand to stud if desired
•  Integral “wings" provide rigid support when floorstand is
mounted between studs
•  Optional cable containment clip securely attaches to
floorstand without hardware
•  Patented Marty Mouse™ ears enable boxes to be secured
with or without the plaster rings
•  Finish: Pre-galvanized
UPC/Part Catalog
Number Number Qty
782051 52944 BBF15 15" Floorstand 25
782051 52945 BBF18 18" Floorstand 25
782051 52946 BBF24 24" Floorstand 25
782051 52947 BBFC Cable Containment Clip 25
782051 52948 BBF15C
782051 52949 BBF18C
782051 52950 BBF24C
Patent # 5595362
#7956285B2
15" Floorstand with
18" Floorstand with
24" Floorstand with
Box Center Height
Cable Containment Clip
Cable Containment Clip
Cable Containment Clip
Box
25
25
25
BBF15
BBF18
Notes: Read safety/installation instruction sheet in packages before use.
BBF24
BBFC
BBFxxC
3
Ruff-IN™ Products
Double sided box support bracket
•  Double sided box support designed
for pre-fab installations.
•  Unit can be installed on either side
of stud without repositioning box or devices
•  Patented Marty-Mouse™ ears feature
an innovative keyhole pattern to secure outlet box to bracket with or without plaster ring
•  Marty-Mouse ears simplify wiring
of pre-fab units. Plaster ring can be removed for full access to box contents while box remains in place
UPC/Part Catalog
Number Number Qty
781011 38645 BB73 31⁄2" & 21⁄2" 50
781011 38717 BB74 4", 31⁄2" & 21⁄2" 50
781011 38759 BB76 6", 51⁄2", 31⁄2", 21⁄2" 25
Patent # 5595362
•  Wider box opening accommodates
one or two gang adjustable plaster rings (B1AJ & B2AJ - see pg. 19)
•  Enhanced far-side support stands
up during drywall installation and out performs competitor brackets
•  Finish: Pre-galvanized
Stud Size
BB74
shown
Box
Single sided box support brackets
•  Improved far-side support prevents
box movement in wall cavity
•  Adjustable far-side supports designed
to help reduce labor
•  Brackets may be piggy-backed in
series
UPC/Part Catalog
Number Number Qty
781011 18190 BB4-23 31⁄2" & 21⁄2" 100
781011 18200 BB4-4 4", 31⁄2" & 21⁄2" 100
781011 18202 BB4-6 6", 51⁄2", 31⁄2", 21⁄2" 100
BB4-23
•  Not recommended for pre-installed
wiring devices. See BB70 (page 5) for an improved pre-fab assembly solution
Stud Size
Box
BB4-4
BB4-6
4
Notes: Read safety/installation instruction sheet in packages before use.
Ruff-IN™ Products
Double sided support brackets
•  Improved far-side support prevents box movement in wall cavity
•  Adjustable far-side supports designed to help reduce labor
•  Ruff-IN™ assemblies available with box, plaster ring and ground wire
UPC/Part Catalog
Number Number Qty
799038 48375 BB4-23D 31⁄2" & 21⁄2" 50
799038 48376 BB4-4D 4", 31⁄2" & 21⁄2" 50
799038 48377 BB4-6D 6", 51⁄2", 31⁄2", 21⁄2" 50
BB4-23D
Stud Size
BB4-4D
Box support brackets
•  Interlocking wrap-around design provides extra rigidity
•  Compatible with 1-gang and 2-gang Rapid Ring™ and
adjustable plaster rings (see pages 9 & 10)
•  Adjustable for varying stud depths (21⁄2" to 6"); simply bend
bracket for 2
• For 51⁄2" depth, snap the BB70E into the next notch on the
bracket side
1
2", 31⁄2" and 4" depths
•  Integral mounting tabs for attaching plaster rings
•  Multiple brackets may be ganged together
•  Available factory assembled as part of the Ruff-IN™ pre-fab
line with box, mud ring, and ground wire
•  Finish: Pre galvanized
Box
BB4-6D
UPC/Part Catalog
Number Number Qty
799038 56399 BB70 21⁄2" - 4" 50
799038 56400 BB70E* 51⁄2" - 6" 50
Patent #944236B2
*BB70E (Sold separately, must be used with BB70)
Metal Stud Size
Notes: Read safety/installation instruction sheet in packages before use.
Box
BB70
Can be used with BBFS-18 (floor stand) See page 8.
5
Ruff-IN™ Products
Multiple box mounting brackets
•  Increased strength and rigidity help withstand the stress
of drywall installation
•  Supports most US & Canadian boxes and plaster rings
4" SQ. and 4
•  Compatible with 1-gang and 2-gang Rapid Ring™ and
adjustable plaster rings
•  Available factory assembled as part of the Ruff-IN
pre-fab line with box(es), mud ring(s), and ground wire(s)
•  Finish: pre-galvanized
•  Patent pending
UPC/Part Catalog Number Number Qty
781011 02898 BB8-16 16" 25
781011 02900 BB8-24 24" 25
11
16" SQ
(see pages 9 & 10)
Stud Size
Box
3
2
1
BB8-16
4
3
2
1
BB8-24
Open box support mounting brackets
•  Open box support allows for adjustability of box position
between studs
•  Supports most U.S. and Canadian boxes and/or plaster
rings 4" SQ., 411⁄16" SQ., 5" SQ., and multi-gang boxes
•  Fits up to 11⁄2" wide studs 16" to 24" on center
•  Compatible with Rapid Ring™ & adjustable plaster rings
(see pages 9 & 10)
•  Field cut to adjust to non-standard stud spacings
•  Stamped markings at 1⁄4", 1⁄2", and 1" increments to allow
the installer to easily locate the desired box position
•  Available factory assembled as part of the Ruff-IN pre-fab
line with box(es), mud ring(s), and ground wire(s)
•  BB7AP alignment plate centers and secures box to the
bracket, allows for easy adjustment of box location
•  Finish: pre-galvanized
•  Patent pending
UPC/Part Catalog Number Number Qty
781011 45325 BB7-16 16" 25
781011 45328 BB7-24 24" 25
799038 59494 BB7AP 100
Stud Size
Box
BB7-16
BB7-24
BB7AP
Notes: Read safety/installation instruction sheet in packages before use.
B-Line series Ruff-IN pre-fab systems6
Uni-Mount™ box supports
•  Provides a secure box support and
features a built-in plaster ring
•  Rigid bracket design eliminates the
need for far-side support
•  Guide tabs ensure alignment on
studs
•  Ruff-IN™ assemblies available with
box, plaster ring and ground wire
Ruff-IN™ Products
•  Fire stop pad can be pre-installed in
boxes if desired
•  Not recommended for pre-installed
wiring devices. (See BB70 on page 5 for an improved pre-fab assembly solution)
BB40-10
UPC/Part Catalog Number Number Qty
782051 22768 BB40-08
782051 22771 BB40-10
782051 22772 BB40-12
782051 22773 BB45-08
782051 22774 BB45-10
782051 22775 BB45-12
Plaster Ring
1
2" raise 50
5
8" raise 50
3
4" raise 50
1
2" raise 50
5
8" raise 50
3
4" raise 50
Box
Heavy duty box hanger
•  Supports octagonal or square boxes
on 24" span
•  Bendable ends mount 11⁄2" or 21⁄8"
deep boxes without tools
•  Self-centering feature positions box
on center
•  Includes BA50C 4T box mounting clip
UPC/Part Catalog
Number Number Qty
•  Ultimate static load capacity: 50 lbs.
(without dedicated dropwire)
•  Static load capacity: 70 lbs. (with
dedicated dropwire) 35 lbs. Canada
•  Finish: pre-galvanized
Description
Box
BB45-08
BA50
BA50D
781011 96490 BA50 Box Hanger 25
781011 96491 BA50D Box Hanger for Box 25
with 11⁄2" Extension
782051 18460 BA50A Adjustable Box 10
Hanger for T-Bar
Notes: Read safety/installation instruction sheet in packages before use.
B-Line series Ruff-IN pre-fab systems 7
BA50A
Loading...
+ 16 hidden pages