Fiberglass
BFV100 thru BFV300
Design Load
Adjustable Pipe Clamps
• Completely Non-Metallic
• Adjustable to U.S. & Metric Pipe Diameters
• Fits OD Sizes
• Easy To Install
• No Special Tools Required
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
• Not recommended for vertical installation without additional
Stop-Lock Kit. Kit includes one square washer, channel nut
and hex head cap screw.
Order (Stop-Lock Kit on page 191) BFVSLhardware or BFVSLMount kit below clamp when used in vertical strut to
prevent clamp slipping.
Part No. Pipe Sizes Range Load Torque
BFV100
BFV200 11/2 - 2 (40 - 51) 1.90 - 2.37 (48.3 - 60.3) 135 (.60) 36 (4.07)
BFV300 21/2 - 3 (63 - 76) 2.87 - 3.50 (73.0 - 88.9) 145 (.64) 36 (4.07)
3
/4” (19.0) to 31/2” (88.9)
3
1
/2 for 1/2”-13 hardware.
/8 for 3/8”-16
Stop-Lock Kit
for vertical
installation
Nominal Pipe O.D. Design Max.
in. mm in. mm Lbs. kN in.-Lbs. N•m
1
/2 - 11/2 (15- 40) .75 - 1.90 (21.3 - 48.3) 135 (.60) 10 (1.13)
Fiberglass Materials
BFV2000 Series
Non-Metallic Pipe Clamps
• For rigid and PVC conduit.
• Standard hardware includes slotted round head machine
screw and square nut in 316 stainless steel
• Design Load Safety Factor of 3
• Material: Glass Reinforced PPO
• Not recommended for vertical installation without additional Stop-Lock
Kit. Kit includes one square washer, channel nut and hex head cap screw.
Order (Stop-Lock Kit on page 191) BFVSL-
1
BFVSL-
/2 for 1/2”-13 hardware. Mount kit below clamp when used
in vertical strut to prevent clamp slipping.
• If non-metallic hardware is required, add N to the part number.
Example: BFV2008N
Nominal Design Load Maximum
Part No. Pipe Size Torque
in. mm Lbs. kN in.-Lbs. N•m
BFV2008
BFV2009
1
/2 (15) 300 (1.33) 10 (1.13)
3
/4 (20) 300 (1.33) 10 (1.13)
BFV2010 1 (25) 300 (1.33) 10 (1.13)
BFV2011 11/4 (32) 300 (1.33) 10 (1.13)
BFV2012 11/2 (40) 300 (1.33) 10 (1.13)
BFV2013 2 (50) 300 (1.33) 10 (1.13)
BFV2014 21/2 (65) 300 (1.33) 10 (1.13)
BFV2015 3 (80) 300 (1.33) 10 (1.13)
BFV2016 31/2 (90) 300 (1.33) 10 (1.13)
BFV2017 4 (100) 300 (1.33) 10 (1.13)
3
/8 for 3/8”-16 hardware or
Design Load
Stop-Lock Kit
for vertical
installation
Strut Systems
Reference page
183
for general fitting specifications.
192
Fiberglass
BFP2400 Series
2-Hole Pipe Clamps
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyester
15/8”
(41.3)
Design Load
Pipe
Size
A
13
/32” (10.3)
Hole Dia.
Fiberglass Materials
Nominal Design
Part Pipe ABLoad
No. Size
in. mm in. mm in. mm Lbs. kN
BFP2400-2 2 (50) 23/8 (60) 51/2 (140) 115 (0.51)
BFP2400-3 3 (80) 31/2 (89) 63/4 (171) 130 (0.58)
BFP2400-4 4 (100) 41/2 (114) 73/4 (197) 150 (0.66)
BFP2400-6 6 (150) 65/8 (168) 10 (254) 150 (0.66)
BFV751 & BFV751J
Beam Clamp
• Design Load Safety Factor of 3
• BFV751J (clip included) must be used when installed on
tapered flange beams.
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316 ASTM F593 Group 2, S4
B
1
/2”-13 x 2” (50.8)
Screw
3”
(76.2)
BFV751
(Clamp
Only)
BFV751J
(Clamp and
Retainer Clip)
1”
(25.4)
41/4”
(108.0)
Part No. For Hanger Rod Design Load Torque
BFV751-3/8
BFV751J-3/8
BFV751-1/2
BFV751J-1/2
BFV751-5/8
BFV751J-5/8
Size A
3
/8”-16 500 (2.22) 10 (13)
3
/8”-16 500 (2.22) 10 (13)
1
/2”-13 500 (2.22) 10 (13)
1
/2”-13 500 (2.22) 10 (13)
5
/8”-11 500 (2.22) 10 (13)
5
/8”-11 500 (2.22) 10 (13)
Lbs. kN ft.-Lbs. N•m
Reference page 183 for general fitting specifications.
193
Tapped for
Hanger Rod
Size A
11/8”
(28.6)
3
BFVATR
/8”
& BFPUATRHN
(Order Separately)
Strut Systems
BFV755
Beam Clamp
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316 ASTM F593 Group 2, S4
3”
(76.2)
Part No. For Hanger Rod Design Load Torque
BFV755-3/8
BFV755-1/2
Size A
3
/8”-16 400 (1.78) 10 (13)
1
/2”-13 400 (1.78) 10 (13)
Lbs. kN ft.-Lbs. N•m
BFV3104 Series
Clevis Hangers
• Design Load Safety Factor of 3
• Insulation may be required at higher temperatures.
• Order hanger rod and nuts separately.
• Material: Glass Reinforced Polyurethane For BFV3104-1 thru BFV3104-6
• Material: Glass Reinforced Polyester & Vinyl Ester For BFV3104-8 thru BFV3104-12
at 120°F (49°C).
25/8”
(66.7)
Fiberglass
1
/2”-13 x 2” (50.8)
Screw
3
/4”
(19.0)
Tapped for
Hanger Rod
Size A
Fiberglass Materials
C
A
A
B
BFV3104-1 thru BFV3104-6 BFV3104-8 thru BFV3104-12
Nominal Hanger Design
Part No. Pipe ABCRod Load
Size Size
in. mm in. mm in. mm in. mm Lbs. kN
BFV3104-1 1 (50) 11/2 (38) 41/4 (108) 11/4 (32)
BFV3104-11/2 11/2 (65) 2 (51) 51/8 (130) 11/4 (32)
BFV3104-2 2 (50) 21/2 (63) 61/2 (165) 11/4 (32)
BFV3104-
21/2, 3, 4
21/2-4 (65-100) 51/8 (130) 10 (254) 11/2 (38)
BFV3104-6 6 (150) 63/4 (171) 125/16 (313) 2 (51)
1
/2”-13 670 (2.98)
1
/2”-13 670 (2.98)
1
/2”-13 730 (3.25)
1
/2”-13 1150 (5.11)
1
/2”-13 1170 (5.20)
Nominal Hanger Design
Part No. Pipe AB CRod Load
Size Size
in. mm in. mm in. mm in. mm Lbs. kN
BF*3104-8 8 (200) 91/4 (235) 165/8 (422) 3 (76)
BF*3104-10 10 (250) 113/8 (289) 197/8 (505) 4 (101)
BF*3104-12 12 (300) 131/2 (343) 223/8 (568) 5 (127)
5
/8”-11 350 (1.55)
5
/8”-11 450 (2.01)
5
/8”-11 600 (2.69)
C
B
*Specify P for polyester or V for Vinyl ester.
Strut Systems
Reference page
183
for general fitting specifications.
194
Loading...