Cooper B-Line B3100, B3100C, B3100F User Manual

Pipe Hangers

B3100 - Standard Clevis Hanger

SLIDE-RITE™ Clevis Hanger Features

Pipe will not ‘pinch’ when installing.

15° swing in either direction allows pipe to easily
feed thru.

Engineered design aligns bolt holes for quicker
overhead installation.

*SLIDE-RITE™ Clevis Hanger
design, as shown below, for
sizes 2, 2

Pat. No. 5,848,770

1

/2, 3, 4, 5 & 6.

5,924,655

Component of State of

California OSHPD Approved

Seismic Restraints System

A

E

D

(Rod Size)

Hanger Rod

Not Included

C

B

Bottom of pipe to top of hanger.

Center of pipe to top of hanger.

Center of pipe to bottom of

Minimum thread length of hanger rod

Top of cross bolt to bottom of hanger

rod nut inside the hanger.

B

C

D

Rod Take-Out

hanger rod.

E

F

Adjustment

Pipe Hangers

Nominal Pipe Size Rod Size A BCD

Part No. in. (mm) Std NFPA** in. (mm) in. (mm) in. (mm)

B3100-1/2

B3100-3/4

1

/2" (15)

3

/4" (20)

B3100-1 1" (25)

B3100-11/4 11/4" (32)

B3100-11/2 11/2" (40)

B3100-2 * 2" (50)

B3100-21/2 * 21/2" (65)

B3100-3 * 3" (80)

B3100-31/2 31/2" (90)

B3100-4 * 4" (100)

B3100-5 * 5" (125)

B3100-6 * 6" (150)

B3100-8 8" (200)

B3100-10 10" (250)

B3100-12 12" (300)

B3100-14 14" (350) 1"-8 -- 193/8"

B3100-16 16" (400) 1"-8 -- 213/8"

B3100-18 18" (450) 1"-8 -- 25"

B3100-20 20" (500) 11/4"-7 -- 283/4"

B3100-24 24" (600) 11/4"-7 -- 323/4"

B3100-30 30" (750) 11/4"-7 -- 3915/16"

B3100-36 36" (900) 11/4"-7 -- 46"

3

/8"-163/8"-16 21/8" (54.0) 13/4" (44.4)

3

/8"-163/8"-16 21/2" (63.5) 2" (50.8) 11/8" (28.6)

3

/8"-163/8"-16 27/8" (73.0) 21/4" (57.1) 13/8" (34.9)

3

/8"-163/8"-16 31/2" (88.9) 211/16" (68.2) 113/16" (46.0)

3

/8"-163/8"-16 4" (101.6)` 31/16" (77.8) 21/4" (57.1)

3

/8"-163/8"-16 41/2" (114.3) 35/16" (84.1) 21/2" (63.5)

1

/2"-133/8"-16 53/8" (136.5) 315/16" (100.0) 31/16" (77.8)

1

/2"-133/8"-16 61/2" (165.1) 43/4" (120.6) 315/16" (100.0)

1

/2"-133/8"-16 71/4" (184.1) 51/4" (133.3) 41/16" (103.2)

5

/8"-113/8"-16 73/4"

5

/8"-111/2"-13 83/4"

3

/4"-101/2"-13 105/16"

3

/4"-101/2"-13 123/4"

7

/8"-95/8"-11 151/8"

7

/8"-95/8"-11 171/2"

(196.8)

(222.2)

(261.9)

(323.8)

(384.2)

(444.5)

(492.1)

(542.9)

(635.0)

(730.2)

(831.8)

(1014.4)

(1168.4)

51/2" (139.7) 51/2" (139.7)

61/8" (155.6) 6" (152.4)

615/16" (176.2) 7" (177.8)

87/16" (214.3) 71/8" (181.0)

93/4" (247.6) 83/8" (212.7)

111/8" (282.6) 911/16" (246.1)

123/8" (314.3) 105/8" (269.9)

133/8" (339.7) 119/16" (293.7)

16" (406.4) 143/16" (360.3)

173/4" (450.8) 165/8" (422.3)

193/4" (501.6) 185/8" (473.1)

2415/16" (633.4) 223/4" (577.8)

28" (711.2) 25" (635.0)

15

/16" (23.8)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

49

B-Line series Pipe Hangers & SupportsEaton

Pipe Hangers

B3100 - Standard Clevis Hanger

Size Range:1/2” (15mm) to 36” (900mm)

Component of State of

California OSHPD Approved

Seismic Restraints System

Material: Steel

Function: Recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield.

Note: When an oversized clevis is used, a pipe spacer should be placed over the cross bolt to assure that the

lower U-strap will not move in on the bolt. When attaching seismic bracing to the clevis hangers, a Fig. 1CBS
(cross bolt spacer) must be installed. See Seismic Restraints Approval Guidelines.

Order pipe sleeves Fig. 1CBS-(pipe size) separately.

Approvals:

Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide

Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD
projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines.
in the USA (UL) and Canada (cUL) for sizes
(FM) for

3

/4” (20mm) thru 12” (300mm) pipe.

3

/4” (20mm) thru 12" (300mm). Factory Mutual Engineering Approved

Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 1

and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1.

Underwriter's Laboratories Listed

Also available to accommodate rod

schedule per National Fire Protection Association (NFPA) Pamphlet 13.

Maximum Temperature: 650°F

Standard Finish: Plain, Electro-Galvanized, DURA GREEN

(343°C).

™

, or Hot-Dip Galvanized

also available in Stainless Steel

Part

Order By:

number and finish.

For AWWA - Ductile Iron Clevis Hangers, see B3102, page 52.

Special Note: Do not use the dimensions shown in the B3100 chart for NFPA hanger sizes.

Contact

customer service

for NFPA rod sizing on 1/2” (15mm) thru 12” (300mm) pipe.

Part numbers will be 1NFPA-pipe size.

E Adjustment F Design Load Approx. Wt./100

Part No. in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)

B3100-1/2 21/2" (63.5)

B3100-3/4 21/2" (63.5)

B3100-1 21/2" (63.5)

B3100-11/4 21/2" (63.5)

7

/16" (11.1) 730 (3.25) 25 (11.3)

1

/2" (12.7) 730 (3.25) 29 (13.1)

5

/8" (15.9) 730 (3.25) 35 (15.9)

7

/8" (22.2) 730 (3.25) 40 (18.1)

B3100-11/2 21/2" (63.5) 13/16" (30.2) 730 (3.25) 42 (19.0)

B3100-2 * 21/2" (63.5) 15/8" (41.3) 730 (3.25) 52 (23.6)

B3100-21/2 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 90 (40.8)

B3100-3 * 21/2" (63.5) 2" (50.8) 1350 (6.00) 110 (49.9)

B3100-31/2 21/2" (63.5) 2" (50.8) 1350 (6.00) 142 (64.4)

B3100-4 * 21/2" (63.5) 2" (50.8) 1430

B3100-5 * 21/2" (63.5) 2" (50.8) 1430

B3100-6 * 3" (76.2) 2" (50.8) 1940

B3100-8 31/2" (88.9) 25/16" (58.7) 2000

B3100-10 31/2" (88.9) 25/16" (58.7) 3600

B3100-12 31/2" (88.9) 25/8" (66.7) 3800

B3100-14 4" (101.6) 27/8" (73.0) 4200

B3100-16 4" (101.6) 211/16" (68.3) 4600

B3100-18 41/2" (114.3) 315/16" (100.0) 4800

B3100-20 5" (127.0) 53/8" (136.5) 4800

B3100-24 5" (127.0) 53/8" (136.5) 4800

B3100-30 5" (127.0) 61/4" (158.7) 6000

B3100-36 5" (127.0 57/16" (138.1) 6000

(6.36) 132 (59.9)

(6.36) 215 (97.5)

(8.63) 320 (145.1)

(8.89) 485 (220.0)

(16.01) 846 (383.7)

(16.90) 1083 (491.2)

(18.68) 1432 (649.5)

(20.46) 2200 (997.9)

(21.35) 2500 (1134.0)

(21.35) 4400 (1995.8)

(21.35) 5000 (2268.0)

(26.69) 6600 (2993.7)

(26.69) 8474 (3843.8)

Pipe Hangers

*SLIDE-RITE™ Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6.

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

50

Eaton

Pipe Hangers

B3100C - Standard Clevis Hanger - Plastic Coated
B3100F - Standard Clevis Hanger - Felt Lined for Copper Tubing

Size Range:1/2” (15mm) to 8” (200mm) pipe

Material: Steel

3

Insulation Material:

/16” (4.8mm) Felt

Service: The B3100F is designed for the suspension of
copper tube so as to prevent electrolysis between tubing
and hanger. The B3100C is designed for steel or other
pipe types of the same O.D. Both B3100F and B3100C
act to reduce noise and vibration in pipe or tubing
systems.

Approvals: Underwriter's Laboratories Listed in the USA
(UL) and Canada (cUL).

Maximum Temperature: 650°F

(343°C).

Standard Finish: Plain, Electro-Galvanized, or Hot-Dip
Galvanized. Contact customer service for alternative
finishes and materials.

Order By: Part number and finish.

Pipe Size Rod Size BCD

Part No. in. (mm) A in. (mm) in. (mm) in. (mm)

B3100-1/2
B3100-3/4

1

/2" (15)

3

/4" (20)

B3100-1 1" (25)
B3100-11/4 11/4" (32)
B3100-11/2 11/2" (40)

Pipe Hangers

B3100-2 2" (50)
B3100-21/2 21/2" (65)
B3100-3 3" (80)
B3100-31/2 31/2" (90)
B3100-4 4" (100)
B3100-5 5" (125)
B3100-6 6" (150)
B3100-8 8" (200)

A

E

D

3

/8"-16 21/8" (54.0) 111/16" (42.9)

3

/8"-16 27/16" (61.9) 17/8" (47.6) 11/8" (28.6)

3

/8"-16 213/16" (71.4) 21/8" (54.0) 13/8" (34.9)

3

/8"-16 37/16" (87.3) 29/16" (65.1) 113/16" (46.0)

3

/8"-16 4" (101.6)` 3" (76.2) 21/4" (57.1)

3

/8"-16 41/2" (114.3) 31/4" (82.5) 21/2" (63.5)

1

/2"-13 59/16" (141.3) 4" (101.6) 31/16" (77.8)

1

/2"-13 63/4" (171.4) 47/8" (123.8) 315/16" (100.0)

1

/2"-13 7" (177.8) 5" (127.0) 41/16" (103.2)

5

/8"-11 713/16"

5

/8"-11 91/16"

3

/4"-10 107/16"

3

/4"-10 123/4"

(198.4)

(230.2)

(265.1)

(323.8)

(Rod Size)

Hanger Rod

Not Included

C

51/2" (139.7) 43/8" (111.1)
61/8" (155.6) 5" (127.0)

615/16" (176.2) 511/16" (144.5)

83/8" (212.7) 71/8" (181.0)

Bottom of pipe to top of hanger.

Center of pipe to top of hanger.

Rod Take-Out

Center of pipe to bottom of

hanger rod.

Minimum thread length of

hanger rod

Top of cross bolt to bottom of hanger

B

Adjustment

rod nut inside the hanger.

15

/16" (23.8)

B

C

D

E

F

E Adjustment F Design Load Approx. Wt./100

Part No. in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)

B3100-1/2 21/2" (63.5)
B3100-3/4 21/2" (63.5)
B3100-1 21/2" (63.5)
B3100-11/4 21/2" (63.5)

7

/16" (11.1) 730 (3.25) 25 (11.3)

1

/2" (12.7) 730 (3.25) 29 (13.1)

5

/8" (15.9) 730 (3.25) 35 (15.9)

7

/8" (22.2) 730 (3.25) 40 (18.1)

B3100-11/2 21/2" (63.5) 13/16" (30.2) 730 (3.25) 42 (19.0)
B3100-2 21/2" (63.5) 15/8" (41.3) 730 (3.25) 52 (23.6)
B3100-21/2 21/2" (63.5) 2" (50.8) 1350 (6.00) 90 (40.8)
B3100-3 21/2" (63.5) 2" (50.8) 1350 (6.00) 110 (49.9)
B3100-31/2 21/2" (63.5) 2" (50.8) 1350 (6.00) 142 (64.4)
B3100-4 21/2" (63.5) 2" (50.8) 1430
B3100-5 21/2" (63.5) 2" (50.8) 1430
B3100-6 3" (76.2) 2" (50.8) 1940
B3100-8 31/2" (88.9) 25/16" (58.7) 2000

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

51

(6.36) 132 (59.9)
(6.36) 215 (97.5)
(8.63) 320 (145.1)
(8.89) 485 (220.0)

B-Line series Pipe Hangers & SupportsEaton

B3100C

B3100F