Cooper B-Line B3083, B3083WO, B3080S, B3080L User Manual

Upper Attachments

B3083 - Welded Beam Attachment (TOLCO Fig. 305)
B3083WO - Welded Beam Attachment Without Pin (TOLCO Fig. 304)

Size Range:3/8"-16 thru 2"-41/2 rod

Material: Steel (Stainless steel available)

Function: Designed for attaching hanger rod to the bottom of

structural steel where heavy loads and large hanger rod sizes are
required. Can be welded in place in either the upright or inverted
position. When using B3083WO, attach hanger rod to bolt or pin
with a B3200 weldless eye nut or B3210 and B3211 series eye rods.

Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 22 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 22.

Finish: Plain or Electro-Galvanized. Contact B-Line for alternative
finishes and materials.

Order By: Part number (with or without hardware) and finish.

Note: When ordering with hardware for sizes

cap screws and hex nuts will be supplied. For 1

3

/8 thru 11/8, hex head

1

/4 thru 2, clevis pin
and cotter pins will be supplied. Must be specified with or without
hardware.

Center of cross bolt to bot-

tom of attachment.

Center of cross bolt to top

of attachment.

B

C

Bolt or Pin

A

(Rod Size)

Hanger Rod

Not Included

T x W

Steel Size

Size

Field weld where

required.

D Dia.

B

C

E

B3083-3/8

B3083-1/2

B3083-5/8

B3083-3/4

B3083-7/8

B3083-1 1"-8 11/8" (28.6) 5900 (26.24) 4620 (20.55) 394 (178.6) 596 (270.2)

Attachments

Upper

B3083-11/8 11/8"-7 11/4" (31.7) 7450 (33.14) 5830 (25.93) 402 (182.2) 680 (308.3)

B3083-11/4 11/4"-7 13/8" (34.9) 9500 (42.25) 7440 (33.09) 734 (332.7) 955 (432.9)

B3083-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 10807 (48.07) 1460 (661.8) 1817 (823.7)

B3083-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 14566 (64.79) 1746 (791.5) 2310 (1047.1)

B3083-2 2"-41/2 21/4" (57.1) 24600 (109.42) 19625 (87.29) 2190 (992.7) 2996 (1358.1)

B3083-3/8

B3083-1/2

B3083-5/8

B3083-3/4

B3083-7/8

B3083-1

B3083-11/8

B3083-11/4

B3083-11/2

B3083-13/4

B3083-2

Pin or Design Load Approx. Wt./100

Rod Size Bolt Size 650° F

(349°C) 750°F (399°C) W/O Hardware With Hardware

Part No. A in. (mm) Lbs. (kN) Lbs. (kN) Lbs. (kg) Lbs. (kg)

3

/8"-161/2" (12.7) 730 (3.25) 572 (2.54) 89 (40.3) 110 (49.9)

1

/2"-135/8" (15.9) 1350 (6.00) 1057 (4,70) 87 (39.4) 123 (55.8)

5

/8"-113/4" (19.0) 2160 (9.61) 1692 (7.52) 84 (38.1) 140 (63.5)

3

/4"-107/8" (22.2) 3230 (14.37) 2530 (11.25) 173 (78.4) 268 (121.5)

7

/8"-9 1" (25.4) 4480 (19.93) 3508 (15.60) 234 (106.1) 376 (170.4)

BCDia. D E T x W

Part No.

in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

2" (50.8)

2" (50.8)

2" (50.8)

2" (50.8) 11/8

3" (76.2) 11/4

3" (76.2) 11/2

3" (76.2) 11/2

7

/8"

7

/8"

7

/8"

(22.2)

(22.2)

(22.2)

" (28.6)

" (31.7) 11/8

" (38.1) 11/4

" (38.1) 13/8

3" (76.2) 2" (50.8) 11/2

4" (101.6) 21/2

5" (127.0) 23/4

5" (127.0) 31/4

" (63.5) 13/4

" (69.8) 2" (50.8) 33/4

" (82.5) 23/8

9

/16" (14.3)

11

/16"

13

/16"

15

/16"

(17.5) 1

(20.6) 1

(23.8) 1

11/4

" (31.7)

1

/4

" (31.7)

1

/4

" (31.7)

1

/2

" (38.1)

" (28.6) 2" (50.8)

" (31.7) 2" (50.8)

" (34.9) 23/4

" (69.8)

" (38.1) 3" (76.2)

" (44.4) 31/2

" (88.9)

" (95.2)

" (60.3) 33/4

" (95.2)

1

/4

" x 2" (6.3 x 50.8)

1

/4

" x 2" (6.3 x 50.8)

1

/4

" x 2" (6.3 x 50.8)

3

/8

" x 21/2

" (9.5 x 63.5)

3

/8

" x 21/2

" (9.5 x 63.5)

1

/2

" x 3" (12.7 x 76.2)

1

/2

" x 3" (12.7 x 76.2)

5

/8

" x 4" (15.9 x 101.6)

3

/4

" x 5" (19.0 x 127.0)

3

/4

" x 5" (19.0 x 127.0)

3

/4

" x 6" (19.0 x 152.4)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

221

Pipe Hangers & Supports

B3080S - (Short) Structural Welding Lug (TOLCO Fig. 343 Short)
B3080L - (Long) Structural Welding Lug (TOLCO Fig. 343 Long)

Size Range: Short lug is available for use with 1/2"-13 thru

1

2"-4

/2 rods; Long lug may be used with 1/2"-13 thru 2"-41/2 rod.

Material: Steel

Function: Designed for attachment to structural steel.

Use with B3201 forged steel clevis.

Approvals: Conforms to Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 57.

Finish: Plain or Electro-Galvanized

Order By: Part number and finish.

H

R

W

B3080S

Upper Attachments

Note:

Must be field welded to

structural steel.

D Dia.

T

H

D Dia.

R

W

B3080L

Pin or Design Approx. Wt./100

Part No. For Bolt Size Load Short Long

Short Long Hanger

B3080S-1/2 B3080L-1/2

B3080S-5/8 B3080L-5/8

B3080S-3/4 B3080L-3/4

B3080S-7/8 B3080L-7/8

1

/2"-135/8" (15.9) 1350 (6.00) 44 (19.9) 71 (32.2)

5

/8"-113/4" (19.0) 2160 (9.61) 44 (19.9) 68 (30.8)

3

/4"-107/8" (22.0) 3230 (14.37) 63 (28.6) 100 (45.3)

7

/8"-9 1" (25.4) 4480 (19.93) 71 (32.2) 100 (45.3)

in. ( mm) Lbs. ( kN) Lbs. (kg) Lbs. (kg)

B3080S-1 B3080L-1 1"-8 11/8" (28.6) 5900 (26.24) 126 (57.1) 169 (76.6)

B3080S-11/8 B3080L-11/8 11/8"-7 11/4" (31.7) 7450 (33.14) 166 (75.3) 208 (94.3)

B3080S-11/4 B3080L-11/4 11/4"-7 13/8" (38.1) 9500 (42.25) 310 (140.6) 381 (172.8)

B3080S-11/2 B3080L-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 503 (228.1) 662 (300.3)

B3080S-13/4 B3080L-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 487 (220.9) 646 (293.0)

B3080S-2 B3080L-2 2"-41/2 21/4" (57.1) 24600 (109.42) 744 (337.5) 808 (366.5)

Part No. Hole Dia. 'D' Short H Long RTW

Short Long

in. ( mm) in. ( mm) in. ( mm) in. ( mm) in. ( mm) in. ( mm)

T

Upper

Attachments

B3080S-1/2 B3080L-1/211/16" (17.5) 11/2" (38.1) 3" (76.2) 11/4" (31.7)1/4" (6.3) 21/2" (63.5)

B3080S-5/8 B3080L-5/813/16" (20.6) 11/2" (38.1) 3" (76.2) 11/4" (31.7)1/4" (6.3) 21/2" (63.5)

B3080S-3/4 B3080L-3/415/16" (23.8) 11/2" (38.1) 3" (76.2) 11/4" (31.7)3/8" (9.5) 21/2" (63.5)

B3080S-7/8 B3080L-7/8 11/8" (28.6) 2" (50.8) 3" (76.2) 11/4" (31.7)3/8" (9.5) 21/2" (63.5)

B3080S-1 B3080L-1 11/4" (31.7) 2" (50.8) 3" (76.2) 11/2" (38.1)1/2" (12.7) 3" (76.2)

B3080S-11/8 B3080L-11/8 13/8" (34.9) 3" (76.2) 4" (101.6) 11/2" (38.1)1/2" (12.7) 3" (76.2)

B3080S-11/4 B3080L-11/4 11/2" (38.1) 3" (76.2) 4" (101.6) 2" (50.8)5/8" (15.9) 4" (101.6)

B3080S-11/2 B3080L-11/2 13/8" (44.4) 3" (76.2) 41/2" (114.3) 21/2" (63.5)3/4" (19.0) 5" (127.0)

B3080S-13/4 B3080L-13/4 2" (50.8) 3" (76.2) 41/2" (114.3) 21/2" (63.5)3/4" (19.0) 5" (127.0)

B3080S-2 B3080L-2 23/8" (60.3) 4" (101.6) 41/2" (114.3) 3" (76.2)3/4" (19.0) 6" (152.4)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

Pipe Hangers & Supports

222