Cooper B-Line Accessories Catalog Page
Accessories
Hinged Window Kits, Casters and Hole Seals
Accessories
Framed Window Kits Frame Detail Window Detail Enclosure
Height Width Height Width Cut-Out
Catalog Number in. mm in. mm in. mm in. mm in. mm
HWK1212 12.50 318 12.50 318 10.12 257 10.12 257 11.87x11.87 301x301
HWK1612 16.50 419 12.50 318 14.12 359 10.12 257 15.87x11.87 403x301
HWK2016 20.50 521 16.50 419 18.12 460 14.12 359 19.87x15.87 505x403
HWK2020 20.50 521 20.50 521 18.12 460 18.12 460 19.87x19.87 505x505
HWK2420 24.50 622 20.50 521 22.12 562 18.12 460 23.87x19.87 606x505
HWK3024 30.50 775 24.50 622 28.12 714 22.12 562 29.87x23.87 759x606
Provides a clear view to components mounted inside an enclosure. The window is made of .21-inch
thick polycarbonate. All mounting hardware is provided for easy installation. Gasketing along all edges
maintains the Type 12 rating. Finished in ANSI 61 gray polyester powder. UL Listed.
Accessories
Painted Steel - U.L. listed as Type 3R,
12, 13, & 4
Stainless Steel - U.L. listed as Type 4X
Casters for Series AW-9 and AW-14 Consoles
Catalog Number Description plate size
4700-CC Set of 4 casters, 2 mounting plates and hardware 16”
4700-CC2 Set of 4 casters, 2 mounting plates and hardware 19”
Each set contains 2 swivel casters and two stationary casters. Composition rubber wheel is selflubricating and has a soft rubber tread with a hard rubber core. Each swivel wheel has a side brake.
Each caster has a 200 pound load capacity.
Mounting
(front to back)
Oil-Tight Hole Seals
Catalog Number Application Max. Hole Hole Seal
Steel Stainless
SPBG SPBGSS Miniature oil-tight pushbutton holes 0.88 22 1.22 31
SPB SPBSS Standard oil-tight pushbutton holes 1.25 32 1.75 44
S050 S050SS 1/2-inch conduit holes .88 22 1.38 35
S075 S075SS 3/4-inch conduit holes 1.06 27 1.56 40
S100 S100SS 1-inch conduit holes 1.38 35 1.88 48
S125 S125SS 1 1/4-inch conduit holes 1.69 43 2.19 56
S150 S150SS 1 1/2-inch conduit holes 2.00 51 2.50 64
S200 S200SS 2-inch conduit holes 2.50 64 3.00 76
S250 S250SS 2 1/2-inch conduit holes 3.00 76 3.50 89
S300 S300SS 3-inch conduit holes 3.62 92 4.12 105
S350 S350SS 3 1/2-inch conduit hole 4.12 105 4.62 117
S400 S400SS 4-inch conduit holes 4.62 117 5.12 130
Diameter Diameter
in. mm in. mm
Protects knockout openings and extra pushbutton or conduit openings from dirt, oil, dust and water.
Each hole seal has oil-resistant gasketing and plated stud and wing nut. Available in steel finished
with ANSI 61 polyester powder or unpainted stainless steel.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
374
Loading...