Cooper B-Line 980-3-8, 980-1-2, 980-5-8, 980-3-4, 980H-7-8 User Manual

Seismic Bracing

TOLCO™Fig. 980 - Universal Swivel Sway Brace Attachment - 3/8”-16 to 3/4”-10 rods

™

TOLCO

Size Range: One size fits bracing pipe 1"
12 gauge

Material: Steel. Stainless Steel Type 316 (SS6) optional.

Function: Multi-functional attachment to structure or braced pipe fitting.

Features: This product’s design incorporates a concentric attachment

opening which is critical to the performance of structural seismic connections.
NFPA 13 (2010) 9.3.5.8.4 indicates clearly that fastener table load values are
based only on concentric loading. Mounts to any surface angle. Break off bolt
head assures verification of proper installation.

Installation: Fig.980 is the structural or transitional attachment component
of a longitudinal or lateral sway brace assembly. It is intended to be combined
with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001,
2002, 4L, 4A or 4B to form a complete bracing assembly. NFPA 13 and/or
OSHPD guidelines should be followed.

To Install: Place the Fig. 980 onto the "bracing pipe". Tighten the set screw
until the head breaks off. Attachment can pivot for adjustment to proper brace
angle.

Approvals: —Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL). Approved by Factory Mutual Engineering (FM). Included in our
Seismic Restraints Catalog approved by the State of California Office of
Statewide Health Planning and Development (OSHPD). For additional load,
spacing and placement information relating to OSHPD projects, please refer
to the TOLCO Seismic Restraint Systems Guidelines.

Note: Fig. 980 Swivel Attachment and Fig. 1001, Fig. 1000, Fig. 2002,
Fig. 4A, Fig. 4B or Fig. 4L pipe clamps make up a sway brace system of UL
Listed attachments and bracing materials which satisfies the requirements of
Underwriters Laboratories and the National Fire Protection Association (NFPA)

Finish: Plain, Electro-Galvanized or Stainless Steel. Contact customer service
for alternative finishes.

Order By: Figure number and finish.

Fig. 980H - Universal Swivel Sway Brace Attachment - 7/8”-9 to 11/4”-7 rods

Component of State of

California OSHPD Approved

Seismic Restraints System

Set Screw

Included

980

A

980H

(2.6mm)

channel, and all structural steel up to 1/4"

(25mm)

thru 2"

(50mm)

(31.7mm)

,

thick.

Mounting Hardware

Is Not Included

D

B

Seismic Bracing

D

A

B

US Patent Numbers
Pat. #6,273,372, Pat. #6,517,030, Pat. #6,953,174,
Pat. #6,708,930, Pat. #7,191,987, Pat. #7,441,730, Pat. #7,669,806

Part

Number AB D*

in. (mm) in. (mm) in. (mm) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs. (kg)

980-3/8 51/4” (133.3) 17/8” (47.6)
980-1/2 51/4” (133.3) 17/8” (47.6)
980-5/8 51/4” (133.3) 17/8” (47.6)
980-3/4 51/4” (133.3) 17/8” (47.6)
980H-7/8 63/4” (171.4) 31/2” (88.9)

13

/32” (10.3) 149 (67.6)

17

/32” (13.5) 148 (67.1)

11

/16” (17.5) 147 (66.7)

13

/16” (20.5)

15

/16” (23.8)

Max. Horizontal Max. Horizontal Design Load** (FM)

Design Load (cULus)

30°-44° 45°-59° 60°-74° 75°-90° Wt./100

2015 1320 1970 2310 2550

(8.96) (5.87) (8.76) (10.27) (11.34)

Approx.

146
402 (182.3)

980H-1 63/4” (171.4) 31/2” (88.9) 11/16” (27.0) 400 (181.4)
980H-11/8 63/4” (171.4) 31/2” (88.9) 13/16” (30.2) 397 (180.1)
980H-11/4 63/4” (171.4) 31/2” (88.9) 15/16” (33.3) 390 (176.9)

* Mounting attachment hole size.

* Mounting attachment hole size.
** Installed with 1” or 1

** Installed with 1” or 1

1

1

/4” Schedule 40 brace pipe.

/4” Schedule 40 brace pipe.

Important! - For load information when using Fig. 980 with

pre-installed or post-installed concrete anchors in

compliance with NFPA 13 (2016) or ASCE 7-10, including

prying factors, see load tables on pages AL1 thru AL21.

Eaton’s B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components,
resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty
provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other
exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are
combined with products not provided by Eaton.

(66.2)

All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.

B-Line series Pipe Hangers & Supports

186

Eaton