Cooper B-Line 28 User Manual
Pipe Clamps
Fig. 28 - “Stand-Off” Hanger & Restrainer for CPVC Plastic Pipe
Size Range: — 3/4"
(20mm)
through 2"
(50mm)
Material: — Steel, Pre-Galvanized
Function: — Designed to be used as a hanger and restrainer for CPVC piping where
the "stand-off" design will ease installation by eliminating the need for wood blocking.
Features:
• Flared edge design protects CPVC pipe from any rough or abrasive surfaces.
• Unique twist and lock design holds pipe firmly in place and allows retrofit type of installation.
• The "Stand-Off" design eliminates the need for wood block extension.
• Can be installed on horizontal or vertical piping regardless of mounting surface orientation.
• Attaches easily to wood structure with two hex head self-threading screws furnished with
product.
• Installs easily using rechargeable electrical driver with
5
/16"
(7.9mm)
extension socket
eliminating impact tool damage to pipe.
• Attaches easily to steel, minimum 18 gauge
(1.024mm)
with (2) 1/4
" x 1" tek type self drilling
tapping screws.
• UL Listed as a hanger and a restrainer for fire sprinkler piping.
Approvals: — Underwriters Laboratory Listed in the USA (UL) and Canada (cUL) to
support automatic fire sprinkler systems. May be installed into wood using fasteners
supplied with product, or into minimum 18 gauge steel using (2)
1
/4" x 1" tek type
screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Fig. 28 satisfies
the UL vertical restraint requirement where needed. UL Listed as a hanger and vertical
restraint when installed on
3
/8"
(9.5mm)
composite wood material. Use two Fig. 27B Speed
Nuts when used as a hanger and restraint. Use one Fig. 27B Speed Nut on the upper
installed screw when used as a hanger only.
Order by: — Part number and pipe size.
Pat. # 7,455,268, Pat. # 7,832,248
A
C
B
Pipe Clamps
(1) Required High
Side of Hanger
Application
Fig. 27B
Hanger Application
Fig. 27B
(2) Required
Hanger and Restraint
Application
Pipe Size ABCApprox. Wt./100
Part No.
28-3/4
in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
3
/4" (20) 31/32" (77.0) 2" (50.8) 31/2" (88.9) 18 (8.1)
28-1 1" (25) 35/16" (84.1) 23/16" (55.6) 31/2" (88.9) 21 (9.5)
28-11/4 11/4" (32) 35/8" (92.1) 23/8" (60.3) 31/2" (88.9) 23 (10.4)
28-11/2 11/2" (40) 4" (101.6) 21/2" (63.5) 31/2" (88.9) 31 (14.0)
28-2 2" (50) 41/2" (114.3) 211/16" (68.3) 35/8" (92.1) 34 (15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
99
Pipe Hangers & Supports
Loading...