Cool Sky NUVENIONVHD User Manual
NUVENIO NV HD
User’s Guide
Digital Satellite Receiver
Before Getting Started
Information contained in this manual is subject to change without notice.
No part of this publication may be copied, reproduced, or translated to another language for any
purpose.
y Be sure to read the user manual before starting the operation of the receiver.
y Do not open the housing. The receiver contains high-voltage components and parts.
y Even after switching off the receiver still contains high-voltage for a while.
y Do not expose to rain or moisture.
y Do not make objects or fluid enter the housing through the ventilation slot. If any spilt liquid
went into to the housing, unplug the power cord and call your local Service provider.
y Do not place close to any heat source.
y Do not press with hard or heavy object.
y To protect possible malfunction by lighting, we recommend you to use power surge unit. Call
your local dealer for advice.
II
Contens
1. Before Getting Started··································································································1
1.1 Main Features ······································································································· 1
1.2 Accessories ···········································································································2
2. Controls and Functions ······························································································3
2.1 Front Panel ··········································································································· 3
2.2 Rear Panel ··········································································································· 4
2.3 Remote Control Unit ······························································································· 5
3. Connections ··············································································································7
3.1 Connecting to the TV, VCR and Satellite Antenna ·························································7
3.2 Connecting DiSEqC switch ·······················································································7
3.3 Connecting to the TV, HiFi system ···············································································8
3.4 Connecting Smart Card module (Optional) ····································································8
4. Settings and Operations ·····························································································9
4.1 Antenna Setup ·······································································································9
4.2 Manage Favorite List ······························································································ 15
4.3 Viewing TV(or Radio) ···························································································· 19
4.4 System Settings ···································································································24
4.5 Other Functions ·····································································································29
4.6 STB Information·····································································································33
4.7 CA Information (Optional) ························································································ 33
5. Appendix ················································································································34
5.1 Troubleshooting ···································································································34
5.2 Specification ········································································································34
5.3 Glossary ·········································································································35
III
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment
WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limit of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help
Main Features
1.1 Main Features
. Easy Menu Function
. TV Guide Function
. RF Output Function
. Electronic Program Guide(EPG) for On Screen Channel Information
. Software Upgrading Function through RS-232C Cable by PC / USB STICK
. Perfect DiSEqC 1.0, DiSEqC 1.2, USALS for Various Antenna Systems
. Supports of Ku/C band, SCPC and MCPC
. Additional Audio Output Function for Connection to Hi-Fi Audio System
. Other Functions of Remote Controller, Receiving Level Selection, Channel Editing,
Menu Language Selection and Audio Selection
. Digital free-to-air Satellite Receiver
. NTSC & PAL Output Function
Regardless of the TV type, NTSC and PAL channels can be viewed by selection
When PAL channel is viewed on NTSC TV, small deletion on up & down sides of the screen may
occur and it is normal, as its conversion is managed by software. And darker color on the bottom
side of the screen may occur, when NTSC channel is viewed on PAL TV.
. 1700 Transponders and 5000 Channel Memory Function
. Teletext Supported
. Multi Language Function(Menu, Audio)
１
1.2 Accessories
RCA cable
HDMI cable
User’s Guide
Batteries (AAA)
Remote Control Unit
Accessories
2
Controls and Functions
2.1 Front panel
Turn the power on/off.
MENU
Shows the menu application.
OK
Select menu or value on menu item.
VOL◀▶
Control volume, change item on menu or input frequency value.
CH▼▲
Change channel, move menu, or input frequency value.
3
Rear Panel
2.2 Rear panel
ATSC INPUT
The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a
TV antenna to TV ANT IN.
LOOP OUTPUT
It provides Composite video. Connect the TV scart on TV to TV.
S-VIDEO
Separate Video, better picture quality than Composite.
LNB IN
It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL
SATELLITE RECEIVER.
IF OUT
It sends signal to another receiver.
VIDEO
It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
AUDIO (R,L)
It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable.
YPbPr
Component analog video signal.
IP Connection
Network interface
USB Connection
It receives data by connecting to USB for software upgrading.
SPDIF
Output for connection to a digital amplifier.
RS-232C
It receives data by connecting to PC for software upgrading. Connect with RS-232C cable a PC and
receiver.
4
Controls and Functions
ON / OFF
The switch is to turn on or off the main power of the receiver mechanically.
5
2.3 Remote Control Unit
Open the controller cover on the back and insert two batteries (AAA - 1.5V).
POWER
Turn the power on/off.
MUTE
Deactivate current sound.
Numeric(0~9)
Change channel or input frequency value.
TV/SAT
Select between TV Channels and Satellite
channels for RF output.
RECALL
It is to move to previous channel.
GUIDE
Shows EPG [ELECTRONIC PROGRAM GUIDE.
FAV
Add TV or Radio channel to the favorite list on Edit TV(Radio)
Channels, or watch favorite channel from your favorite list.
Remote Control Unit
MENU
Shows the menu application.
INFO
Shows the information of current channel.
Click the INFO button twice, EPG mode will be displayed.
EXIT
Exit from the menu.
Volume ▲ ▼
Control volume, change item on menu or input frequency value.
Channel ▲ ▼
Change channel, move menu, or input frequency value.
OK
Shows channel list, Select menu or value on menu item.
Page UP/DOWN
Move to previous/next page on TV(Radio),
6
Controls and Functions
Favorite Channels or Edit TV(Radio) Channels.
TV
Change to TV mode from radio channel.
RADIO
It is for fast change to radio mode from TV channel. Shows the current Radio program list.
ZOOM
2 times zoom in mode. First press, show target area box. Second press, show zoomed screen. Zoom
area can be moved with with arrow keys. Exit zoom in mode with “EXIT” remote key.
RECENT
If you hope to show channel list which you watched TV channel list recently, you have to use this
function and may show channel list easily.
TEXT
Change to Teletext mode.
LANG
Select the audio language from 2 or more audio language channels available.
SIZE
Select between standard 4:3 and wide 16:9 screen sizes.
AUDIO
Select Audio mode (Stereo, left or right).
7
Connections
3.1 Connecting to the TV, VCR and Satellite Antenna
It is not necessary to adjust power, as the product is of free - voltage (AC 110~220V )
1. Connect another scart cable from the TV on the satellite receiver to scart socket on the TV.
2. Connect the RF cable from the TV OUT on the satellite receiver to a TV. Connect an antenna to the
LNB socket on the VCR or other receiver and the RF modulate on the VCR and the TV ANT.IN.
3. Connect a cable of the satellite dish to the DIGITAL on the satellite receiver
3
3.2 Connecting DiSEqC switch
If you have one antenna equipped with many LNBs or two antennas with one LNB on each, you need
a DiSEqC switch.
1. Connect the LNBs to a DiSEqC switch at first.
2. Connect the antenna cable to the OUT connector on the DiSEqC switch and connect the end of
the cable to the DIGITAL on the satellite receiver.
8
Connections
3.3 Connecting to the TV, HiFi system
1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver.
2. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the
HiFi system.
3.4 Connecting Smart Card module (Optional)
To receive the distributed program of Service Provider you need a Smart card
Insert smart card slot for watching TV programs from Service Provider.
NOTE
Insert smart card into a smart card slot with facing IC upwards
9
Antenna Setup
4.1 Antenna Setup
If it is the first time using a receiver, you should set parameters for system configuration.
Refer to the following section.
Turn on your TV and Satellite receiver.
Press the MENU button, main menu screen will appear as shown below.
1. Select Installation on the Main Menu.
2. Select “Antenna Setup”
10
Loading...