Cool Sky NEOSATLITE Users Manual

Settings and Operations

4.4 System Settings

Please make sure to press OK button always, after the changing items of System
Settings.

• Language Setting

Select the language which you desire to display on the screen for your system. Press OK
button to get in more options.

Audio language

Only if a current channel contains 2 or more audio language information, set the
Audio Language as English or other favorite language. Then press OK button for its
confirmation.

Menu Language

For menu language selection, select desired language from Menu Language of
system Settings.

Subtitle Mode

Subtitle is a printed version of the dialogue, narration, and/or sound effects of a TV
program. Subtitle will appear at either the top or bottom of the screen during
Subtitle Language

21

System Settings

Please select the primary and secondary languages in your area.

TV Standard

Except for a few, most countires are using PAL system for TV signal, accordingly set TV
Standard as PAL. To be more flexible for NTSC or PAL signal from different satellites,
select MULTI for automatic signal conversion. Then press OK button for its confirmation.

Time Adjustment

To set the receiver time for EPG(Electronic Program Guide), set the time according to
GMT(Greenwich Mean Time) by using CH

. If EPG in England is needed to set,

adjust as 00:00. In the case of Beijing, adjust as 08:00.

Time Settings

Use clock, sleep, on/off Timer function by choosing time settings menu.

1. Press CH buttons or number buttons to set the local time.

2. Set the time STB turns on with on Timer setting menu.

3. Select a channel you wish to see in running the on Timer function.

4. Set the time STB turns off with off Timer setting menu.

22

Settings and Operations

TV Aspect Ratio

Select 4:3 for normal TV or 16:9 for wide TV. Then press OK button for its confirmation.
If 4:3 ratio is selected on normal TV for wide channel, both left and right side of the
screen will be a bit trimmed. If 16:9 ratio is selected on normal TV for wide channels the
screen trim symptom will not occur. However the screen will be in narrow view.

Wide screen will be properly viewed, only when wide channel is broadcasting.

Initialization

Press OK button from Initialization. If you want initialization, select OK button,
otherwise, select any button of remote controller. The receiver will be turned off and on
automatically after 1~2 seconds to initialize all the values to factory setting mode.

As this procedure will clear and set to factory default values, end users are not
recommended to operate this function.

23

4.5 Game

Select Game on the Main Menu.

1. To play game.

Game

Select Game & Press OK.

2. Select play mode by using number buttons
& press Exit to Exit.

3. Select the color & press OK.

4. Now play the game.

24

5.1 Troubleshooting

5.2 Specification

A p p e n d i x

25

SYMPTOM

No picture display and no LED channel
display

No pictu re dis play with normal LE D
channel display

No satellite channel with MAIN MENU
screen on

No sound with normal screen display

Remote control unit does not work

LNB/Tuner

MPEG

VIDEO

(CVBS)

VIDEO(YPbPr)

Video

(S-Video)

Audio

General Data

RF input frequency
RF input level
LNB control
LNB power
LNB tone switch
External LNB switch

VIdeo
Audio

Resolution
Video output level
Aspect ratio

Video output level
Video output level
Frequency range

Sampling frequency
Frequency response
Audio output level

Supply voltage
Power consumption
Operating temp.
Storage temp.
Dimensions
Weight

950 to 2,150MHz

-65 to -25dBm
DiSEqC1.0/1.2
13V/18V(Max.400mA)
22KH

2KHz(0.6Vp-p)

0/12V(100mA)
MPEG-II Main Profile@Main Level

MPEG-II layer I&II
720 576

1Vp-p into 75
4:3, 16:9

1Vp-p into 75
Y : 1Vp-p into 75

C : 0.3Vp-p into 75
20Hz to 20KHz

32/44.1/48KHz
20Hz to 20KHz Hi-Fi Quality Digital stereo
2V rms into 600

100~240V (AC, 50/60Hz)
Max.25W
0

~ 50

-40 ~65

245(W) 190(D) 50(H)mm

2.8Kg

SOLUTION

Check the power connection

1. Check the connection with TV

2. Check the connection between TV outside input
and receiver cable

1. Check the LNB, Frequency, Polarization and
Symbol Rate from Installation menu

2. Check the connection of receiver or Antenna
angle

1. Check between sound output connector and TV

2. Check if it is not in MUTE condition
Check if the batteries in remote control unit are

dead

Glossary

5.3 Glossary

LNB

Low Noise Block converter. The LNB is an electronic unit mounted on satellite dish to
receive signals reflected by the dish and convert to signals.

L.O. frequency

Local Oscillator frequency as a part of LNB. It converts the satellite frequency to usable
signals for the receiver.

Polarization

Polarization allows several programs to be fitted into same frequency band.

Symbol Rate

Size of the digital package transmission

Parental Control

The function is to allow parents to lock channels for unsuitable viewers. A locked
program can only be unlocked with the password.

DVB

Digital Video Broadcast. International standard for digital TV broadcasting

MPEG

Moving Picture Experts Group, A system for compression of digital data

RF

Radio Frequency

EPG

Electronic Programming Guide. Program information is displayed on the TV screen,
depending upon the satellite condition.

MHz

Abbreviation for MegaHertz. The prefix mega means million, and Hertz means cycles per
second.

DiSEqC

Digital Satellite Equipment Control

26

Appendix

NTSC

National Television Standards Committee

PAL

Phase Alternate Line

Ku band

11~18GHz Frequency

C band

3~4GHz Frequency

SCPC

Single Channel Per Carrier

MCPC

Multi Channel Per Carrier

PID

Packet Identifier.

TP

TransPonder

SCART, RCA

A connector for connection of Satellite receiver, VCR and TV sets.

VCR

Video Cassette Recorder.

27

Made in Korea

3D Resources

8210 Lankershim Blvd. Unit #2

North Hollywood CA 91605

Tel: [phone]

Fax: [phone]

MMNAHJS00NE1C00

CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment

WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.

INFORMATION TO USER:
This equipment has been tested and found to comply with the limit of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

1. Reorient / Relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help