MasterCase H500P Mesh
Outlook: Plastic
Body: Steel
Side panel: Tempered Glass, Steel
2 (Drive Bay support up to 5)
USB 3.0 x 2, USB 2.0 x 2, Audio In & Out (supports
HD Audio)
120mm,
(maximum thickness clearance 55mm)
Front 120mm, 140mm 240mm, 280mm, 360mm
Rear 120mm, 140mm
Clearances
MCM-H500P-MGNN-S10
Mind-Blowing Design
For a system being pushed to its limits, the H500P Mesh offers
unrestricted airflow.
Behind the mesh sits two, pre-installed, 200mm RGB fans that
propel air into the system. The combination of tempered glass
and industrial lines gives the H500P a distinguished, functional
appeal for your build to look as great as it performs.
Airflow is not just about cramming air into the case, it’s also
about efficiently directing the air to move through the system.
The particular placement of vents on the top cover is key in
channeling the flow of air to reduce system temps.
Along with directing airflow, there’s ample room for advanced
builders looking to house complex components like custom
liquid cooling. Whether builders decide to use air cooling,
closed loop, or an open loop system, the H500P’s layout offers
room for development.
Features Specifications & Packing Information
Two 200mm RGB fans behind Mesh front panel –
Optimized airflow is guaranteed with a complete mesh
front panel providing plenty of air intake for the two
pre-installed 200mm RGB fans. Use the RGB lighting to
create a captivating build in your preferred color
theme.
Covers for Clean Building – A PSU shroud, CPU cut
out cover, and additional cable covers take clean cable
management to the next level. Assemble clean builds
like a pro!
Show Off Your Graphics Card* – Two additional PCI
slots at the rear enable you to show off one graphics
card in the vertical position.
Clear View Inside – The MasterCase H500P Mesh has
a light grey tinted tempered glass side panel making it
ideal for showcasing your build with (RGB) lighting.
Liquid Cooling Ready – The MasterCase H500P Mesh
accommodates up to 360mm radiators on the top and
front.
RGB controller and 1 to 3 Splitter Cable for RGB
LED Fans – The included RGB controller can be
connected to the reset switch to manage the lighting of
the two 200mm RGB fans. The RGB Connector Splitter
and 4 pin male to male adapters are also included.
Number
L x W x H)
Port
-installed Fan(s)
Support
-H500P-MGNN-S10
, Steel Mesh
x 242 x 542mm / 21.4 x 9.5 x 21.3 inch
-ITX, Micro-ATX, ATX, E-ATX (support upto
+ 2 (Support vertical graphics card installation)
x 25mm RGB fan x 2, 800RPM
fan x 1, 1200RPM
fan x 3 or 200mm fan x 2
fan x 3 or 200mm fan x 2
fan x 1
140mm, 240mm, 280mm, 360mm
Mount, ATX PS2
(L x W x H)
Cont. W/ Pallet Carton/ Pallet W/O Pallet
20’ 144 18 189
40’ 324 18 387
40 HQ 360 20 444
45’ 400 20 480
kg / 32.4 lb
x 345 x 650mm
* Additional Riser Cable is needed
Features
Two 200mm RGB fans
behind Mesh front panel –
Optimized airflow is
guaranteed with a complete
mesh front panel providing
plenty of air intake for the
two pre-installed 200mm
RGB fans. Use the RGB
lighting to create a
captivating build in your
preferred color theme.
Covers for Clean Building
– A PSU shroud, the CPU cut
out cover and additional
cable covers take clean cable
management to the next
level. Assemble clean builds
like a pro!
Show Off Your Graphics
Card – Two additional PCI
slots at the rear enable you
to show off one graphics
card in the vertical position.
Clear View Inside – The
MasterCase H500P Mesh has
a light grey tinted tempered
glass side panel and a plastic
top cover, making it ideal for
showcasing your build with
(RGB) lighting.
Liquid Cooling Ready –
The MasterCase H500P Mesh
accommodates up to 360mm
radiators on the top and
front.
RGB controller and 1 to 3
Splitter Cable for RGB LED
Fans – The included RGB
controller can be connected
to the Reset Switch to
manage the lighting of the
two 200mm RGB fans. Also
the RGB Connector Splitter
and 4 pin male to male
adapters are included