Cooler Master MCC-C700M-MG5N-S00 User Manual

FEATURES
SPECIFICATIONS & PACKING INFORMATION
RAISING THE BAR(S)
The COSMOS series is known for pushing the limits of
Cooler Master’s case technology. The freedom in layout
organization and the support for unique graphics card mounting make custom building accessible as soon as the COSMOS C700M is unboxed.
The idea is to inspire growth in builders across all levels since the chassis is only as complex as builders need it to be, there will always be room to creatively experiment. If modders decide to take customization even further, the COSMOS frame allows for sandbox-level versatility. The
COSMOS C700M keeps Raising the Bar(s) on custom PC’s by
inspiring builders to escape from the “standard” layout.
Highly Versatile Layout – The unique frame design supports a conventional, chimney, inverse layout, or a fully customized layout. The motherboard tray is also removable for installation outside of the chassis.
Graphics Card Mounting with Riser Cable – The
graphics card bracket can be mounted vertically or
horizontally on either the PSU midplate or on the M. Port. The bracket can also be rotated from 0 to 90 degrees. Also included is a 400mm riser cable for the convenience of being able to connect a vertically mounted graphics card to the motherboard.
ARGB Lighting – Two parallel strips of addressable RGB
lighting run continuously from the top panel to the front
panel, with ambient ARGB lighting on the bottom that reflects against the aluminum bars.
Extensive Cable Cover System – The 3 included covers can be placed on either the M. Port or on the mid-plate, with the ability to mount SSD storage or a reservoir.
Versatile Liquid Cooling Support – A flat radiator bracket design offers more versatility for liquid cooling with the ability to be mounted on the top, front, or bottom of the frame. The two included brackets can each support a 420mm radiator, with the ability to mount fans and a radiator on either side of the bracket.
Aluminum Panels & Handles – Brushed aluminum spans the top panel and front panel, with cast aluminum
handles (and feet) that provide protection & support for
carrying the case.
Curved Tempered Glass Side Panel – A panoramic tempered glass side panel, with two curved edges, offer a wide view of the system build.
Rich Connectivity – The advanced I/O panel comes with
a 4-Pole headset jack (audio+mic), USB 3.1 (Gen 2) Type-
C port, four additional USB 3.0 ports, PWM fan speed button, and an addressable RGB control button.
COSMOS C700M
PRODUCT #MCC-C700M-MG5N-S00
Product Name
COSMOS C700M
Product Number
MCC
-C700M-MG5N-S00
Available Color
Grey, Silver & Black
Materials
Body
Steel
Side Panel
Curved Tempered Glass, Steel
Dimensions
(L x W x H)
650 x 306 x 651mm / 25.6 x 12.0 x
25.6inch
Motherboard Support
Mini
-ITX, Micro-ATX, ATX, E-ATX
(support up to 12" x 10.7")
Expansion Slots
8
Drive Bays
5.25"
1
Combo 3.5" / 2.5"
4 + 1 (in the accessory box)
SSD
4
I/O
Panel
USB Ports
USB 3.1 Type
-C x 1
USB 3.0 Type
-A x 4
Audio
3.5mm Headset
Jack (Audio+Mic)
x 1
3.5mm
Mic Jack x 1
Fans/Lighting
Fan Speed Control Button
ARGB Control Button
Pre
-installed
Fan(s)
Front
140mm PWM Fan x 3 (Speed: 1200RPM / Connector: 4Pin)
Rear
140mm PWM Fan x 1 (Speed: 1200RPM / Connector: 4Pin)
Fan Support
Top
120/140mm fan x 3
Front
120/140mm fan x 3
Rear
120/140mm fan x 1
Bottom
120/140mm fan x 2 (bracket needed)
Radiator Support
Top
120mm, 140mm, 240mm, 280mm, 360mm, 420mm (remove ODD, maximum thickness clearance 70mm)
Front
120mm, 140mm, 240mm, 280mm, 360mm, 420mm (remove ODD)
Rear
120mm, 140mm
Bottom
120mm, 140mm, 240mm
Clearances
CPU Cooler
198mm
Graphics
Card
490mm (without 3.5" HDD BRK) 320mm (with 3.5" HDD BRK)
EAN code
4719512075036
UPC code
884102047527
Net weight
23.8
kg
Gross weight
28.2kg
Carton dimension
(L x W x H)
750 x 411 x 736mm
Cont. W/ Pallet Carton/ Pallet W/O Pallet
20’ 77 7 114
40’ 154 7 240
40 HQ 198 9 288
FEATURES
Highly Versatile Layout
The unique frame design supports a conventional, chimney, inverse layout, or a fully customized layout. The motherboard tray is also removable for installation outside of the chassis.
Graphics Card Mounting
with Riser Cable
The graphics card bracket can be mounted vertically or horizontally on either the PSU midplate or on the M. Port. The bracket can also be rotated from 0 to 90 degrees. Also included is a 400mm riser cable for the convenience of being able to connect a vertically
mounted graphics card to the
motherboard.
ARGB Lighting
Two parallel strips of addressable RGB lighting run continuously from the top panel to the front panel, with ambient ARGB lighting on the bottom that reflects against the aluminum bars.
Extensive Cable Cover System
The 3 included covers can be
placed on either the M. Port or
on the mid-plate, with the ability to mount SSD storage or a reservoir.
Versatile Liquid Cooling Support
A flat radiator bracket design
offers more versatility for liquid
cooling with the ability to be mounted on the top, front, or bottom of the frame. The two included brackets can each support a 420mm radiator, with the ability to mount fans and a radiator on either side of the bracket.
Aluminum Panels & Handles
Brushed aluminum spans the
top panel and front panel, with
cast aluminum handles (and feet) that provide protection & support for carrying the case.
Loading...