MASTERBOX MB500 TUF GAMING EDITION
MasterBox MB500 TUF Gaming
Edition
Steel, Plastic, Tempered Glass
Front 120mm x 3 / 140mm x 2
120 / 140 / 240 / 280 / 360mm
radiator (limited) up to 50mm
thickness without fan
MCB-B500D-KGNN-TUF
ARE YOU TUF ENUF?
Marked by the TUF Gaming spirit, the MasterBox MB500 is
a perfect addition to any (TUF) setup. A PSU cut out was
designed to make the MasterWatt TUF Gaming Edition
visible through the glass side panel. Military styling,
complete with camouflage, outfits the case as a battleready soldier.
A semi-meshed front panel and ventilation holes on top will
allow more airflow from the two pre-installed 120mm RGB
fans in the front and one 120mm RGB fan in the rear. The
thermal performance and aggressive styling of the
MasterBox MB500 TUF Gaming Edition make it a perfect
choice for Gamers and PC enthusiasts.
The spacious interior and two chamber design allows you
to assemble the case with the arsenal of components you
need.
FEATURES SPECIFICATIONS & PACKING INFORMATION
TUF Edition: The PSU cut out and TUF paint mark the
MB500 ready for battle.
Excellent Thermal Performance: Optimized airflow due
to the semi-meshed front panel and ventilation holes on
top of the case.
RGB LED fans: Two 120mm RGB LED fans behind the
front panel and one 120mm RGB LED fan in the rear are
pre-installed to create an amazing lighting effect.
RGB Lighting Control: One RGB controller is included in
the accessory pack. If your MB does not support the RGB
control function, you can connect the RESET button
cable and control the RGB lighting directly from the I/O
panel.
1 to 3 Splitter Cable for RGB LED Fans: The RGB
Connector Splitter and 4 pin male to male adapters are
included.
Certified compatible with: ASUS, Gigabyte, MSI and
ASRock motherboards.
4mm Thick Edge to Edge Tempered Glass Side Panel:
Show off your build in style through the 4mm thick edge
to edge tempered glass side panel.
Full Black Coating & PSU Cover: Let your system stand
out with an all-black background.
Cooling Support: Up to six 120mm fans or up to 360mm
radiator support in the front and and 120mm in the rear,
ensure you don’t have to compromise on performance.
Compatibility Support: Support up to 400mm Graphics
card, 163mm Tower CPU Cooler and 180 PSU in length.
LxWxH)
-installed
Cont. W/ Pallet Carton/ Pallet W/O Pallet
20’ 280 28 320
40’ 560 28 672
40 HQ 640 32 756
(L x W x H)
" HDD
Tray
-B500D-KGNN-TUF
x 211 x 475mm
, Micro-ATX, Mini-ITX
Audio In / Out
x 2 RGB LED fan
x 1 RGB LED fan
1
- 23mm / 0.59” – 0.90”
, Bottom
kg
x 282 x 547mm
FEATURES
TUF Edition
TUF paint marks the MB500
ready for battle.
PSU Shroud Cut Out
PSU Shroud Cut Out
showcases what powers
your setup.
RGB Lighting Control
One RGB controller is
included in the accessory
pack. If your MB does not
support the RGB control
function, you can connect
the RESET button cable and
control the RGB lighting
directly from the I/O panel.
1 to 3 Splitter Cable for RGB
LED Fans:
The RGB Connector Splitter
and 4 pin male to male
adapters are included.
4mm Thick Edge to Edge
Tempered Glass Side Panel:
Show off your build in style
through the 4mm thick
edge to edge tempered
glass side panel.
Full Black Coating & PSU
Cover
Let your system stand out
with an all-black
background.