Coolaroo CLR1346 Installation & Assembly

Water Base
for Cantilever Umbrella
Installation Manual
1. Install Cantilever base cross beams and base pole according to Cantilever umbrella instructions.
2. Remove cap from base unit.
3. Fill base unit with water or sand.
4. Place four lled base units on the cross bars.
Replace cap.
Gale Pacic USA, Inc.: 285 W Central Parkway #1704 Altamonte Springs, FL 32714 1-800-560-4667 www.coolaroousa.com
© Coolaroo is a registered trademark of Gale Pacic Limited. All rights reserved.
Loading...