COOLABAH 40185 Instruction Manual
COOLABAH® BUG ZAPPER 20W
COOLABAH® BUG ZAPPER 20W
Product Number: 40185
Model Number: 40185
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
Product Number: 40185
Model Number: 40185
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
PROBLEM
POSSIBLE CAUSE
CORRECTION
Black Light UV lamp does
not light but there is
zapping on the electrified
grid
1) Zapper is not plugged into a
live power point
2) Lamp has dislodged from
lamp holder
1) Plug into new power point,
ensure socket is ON
2) Contact licenced electrician to
twist globe in a clockwise
direction to secure
Lamp operates but there
is no zapping on the grid
1) New grid is significantly
quieter than traditional grids.
The quiet operation is less
likely to disturb you or your
pets.
1) Check for insects on the grid or
below zapper. Dead insects
indicate a functioning unit.
2) No insects around contact
After sales support 1800 677 982
Intermittent or constant
zapping of electrified grid
1) Electrified grid may have a
large dead insect shorting it.
1) Turn off Bug Zapper and follow
cleaning instructions (above)
Bug Zapper does not
attract flying insects
1) Bug Zapper Is positioned
incorrectly/ not operated at
correct times
1) Review positioning the Bug
Zapper (page 5) and re-position
Operate 24/7 or dusk to dawn.
2) Bait zapper for odour specific
insects or use insect specific
lures Call 1800 677 982 for info.
Lamp does not operate
and electrified grid is not
zapping
1) Zapper is not plugged into
live power point
2) Electrical component failure
1) Try operating from a different
power point
2) Contact After Sales Support
Hotline: 1800 677 982
BUG ZAPPER 20W
V3 June 2018 On Sale 11/2018
Product Number: 40185
Model Number: 40185
Tested and approved to: AS/NZS 60335.2.59 and AS/NZS 60335.1
AS/NZS CISPR 14.1:2013
INSTRUCTION MANUAL
NSW12309
CLEAN AND MAINTANENCE Ensure the Coolabah® Bug Zapper is disconnected from its
power source before performing any type of maintenance.
The electrified grid is self-cleaning, however if there are any insects left between the vertical
hanging grids, blow away with an air blower or use a long handle paint brush to dislodge. Do
not remove the cage of the bug zapper to clean the grid.
DAYTIME PESTS: wasps, beetles and flies are odour or heat seeking and do not respond
primarily to black light UV light, however increased numbers of these pests can be lured to
your Bug Zapper with baiting. Bait such as honey can be applied to a piece of cloth and hung
from the underside (use of lures is also recommended, available on our website)
STORAGE: Store in a cool dry place when not in use. Clean vertical hanging grid (as directed
above) if required.
WASTE PRODUCTS: Dispose of expired energy saving Black Light UV globe in with general
waste, they are non-recyclable
TROUBLE SHOOTING
Page 8
Page 1
COOLABAH® BUG ZAPPER 20W
COOLABAH® BUG ZAPPER 20W
Product Number: 40185
Model Number: 40185
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
Product Number: 40185
Model Number: 40185
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
Contents
2
Important Safety Information
3
Warranty Details
4
Features and Specifications
5
Positioning the Bug Zapper
5
Correct Operation of the Bug Zapper
5
Energy saving UV-BL Lamp Specifications
6
Product Overview
6
Product Dimensions
7
Technical Spec
7
Parts and Accessories
7
Cleaning & Maintenance
8
Disposal
8
Trouble Shooting
8
CONTENTS
Page 2
Page 7
PRODUCT DIMENSIONS: 360 x 214 x 214mm
GROSS WEIGHT: 1.22kg
TECHNICAL SPEC: 230-240V ~ 50Hz 20 WATTS, Class II installation
IPX4 rated
1 x bug zapper
1 x 20 watt energy saving Black Light UV Lamp (pre-installed)
1 x Instruction Manual
PARTS & ACCESSORIES:
Bug Zapper
20W Energy Saving
Black Light Lamp
Loading...