Issue 2 05/08/2021 6
TO USE
1. Clean thoroughly before first use.
2. Place the ingredients to be mixed into the mixing bowl (or
another suitable container if not using the stand) and place
the bowl onto the stand.
3. Fully unwind the mixer cable and check that the speed
control slider is in the off (0) position.
4. Fit mixing accessories of choice into the motor housing,
plug in and if using the stand, fit the mixer onto the stand.
5. Place the mixing heads into the ingredients to be blended.
Do not immerse beyond the top of the mixing heads.
6. Switch on and using the speed slider, select the mixer
speed of choice. Speed 1 is the slowest setting and speed
5 the fastest. The mixing accessory and bowl will start to
turn.
7. If the TURBO (pulse) button is held down whilst the mixer
is in operation the highest speed setting will be
immediately selected. When the button is released the
mixer will slow to the speed shown on the speed control
slider.
8. To switch off, move the speed control slider to the off (0)
position and allow the mixing heads to come to a complete
stop before checking the consistency of the mix. If
satisfactory, remove the mixer.
9. If using the beaters mix for a maximum of 5 minutes.
10. If using the dough hooks with the stand and bowl supplied,
mix for a maximum of 10 minutes. If using without stand
or another bowl mix for a maximum of 5 minutes.
11. If further mixing is required, wait at least 20 minutes before
restarting the mixer.
12. To stop or interrupt the mixing process, move the speed
slider to the off (0) position or turn off at the mains.