Cookworks 423-7350 User Manual [nl]

STAINLESS STEEL DEEP FRYER

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the
following:

1. Read all instructions. Keep the instruction for future reference.

2. To protect against risk of electrical shock, do not immerse cord, plug or unit in water or any other liquid.

3. Never leave the appliance unattended while in use.

4. Keep the appliance out of reach of children.

5. Connect the appliance to an earthed socket.

6. Do not let the mains cord hang over the edge of a table, or touch hot surfaces.

7. Make sure the inner bowl is completely dry before you fill the fryer with oil or fat.

8. Ensure the oil is filled between the minimum and maximum oil level marks inside the oil bowl. Do
not switch the appliance on before you have filled with oil or fat.

9. Hot steam is released through the filter during frying. Keep your hands and face at a safe
distance from the steam.

10. This appliance is intended for household use only.

11. Do not use outdoors.

12. Do not fry food with heavy moisture content as this might cause heavy spattering of oil or fat.

13. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or
is dropped or damaged in any manner.

14. Do not use any accessories that are not recommended by the manufacturer. They could
constitute a danger to user and damage to the appliance.

15. Provide proper ventilation when using the appliance.

16. Unplug from outlet when not in use. Allow to cool before moving, cleaning or storing the appliance.

17. Remove the plug from wall outlet. Do not pull the supply cord.

18. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

19. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliances by a person responsible for their safety.

20. Children should be supervised to ensure that they do not play with the appliance.

21.This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.

KNOW YOUR APPLIANCE

A. Lid

B. Filter

C. Temperature Control knob and Indicator light

D. Bowl

E. View window

F. Frying basket

G. Heater

H. Min and Max oil level marking

I. Metal base with handle

2

A

B

C

D

E

F

G

H

I

Safety cut-out

This fryer is equipped with a safety cut-out to protect the appliance

from overheat such as not enough oil or fat or if blocks of solid fat

are being melted in the fryer.

Carry out the following steps when the safety cut-out has switched

off the appliance.

1. Let oil or fat cool down for 30 mins.

2. Press the reset button where located at the back of the

control panel.

BEFORE FIRST USE

1. Remove the lid, frying basket, fryer and all packaging material from the retail box.

2. Wash the fryer basket and cover in hot, soapy water. Wipe them dry thoroughly.

3. Wipe the inside of the bowl with a damp cloth and make sure it is completely dry before you fill

the fryer with oil or fat.

4.

This fryer is equipped with a safety micro-switch at the control box. This is to ensure the control

box is fixed to the outer metal case in correct position before the unit can be started to use. Fix

the control box to the slot on the side of the outer metal case. Ensure the safety micro-switch is

pressed by the trigger on the outer metal case. The unit cannot be operated until the control box

is fixed to the outer case correctly. If it is not working, remove the control box and fix it again until

the micro-switch has been pressed by the trigger.

Micro-switch Ensure the Micro-switch

is activated by the trigger

Basket assembly

1. Attach the basket handle to the basket by squeezing the

two handle wires together and inserting the ends

through the two eyelets in the basket.

2. Rotate the handle backwards until it locks securely in

the place. Ensure the handle is securely connected to

the basket before operating your fryer.

3