Page 1
Instruction Manual - Please keep for future reference
Cookworks Food Slicer
9-06
Page 2
1
use.
this is not possible due to the size or shape of the food.
damaged in any manner.
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
• Switch off the appliance before changing accessories or approaching parts which move in
• This appliance must be used with the sliding feed table and the piece holder in position unless
• Do not operate any appliance with damaged cord or plug, or if appliance malfunctions or is
similarly qualified persons in order to avoid a hazard.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
OPERATION
on prescriptions to determine if your judgment/reflexes might be impaired.
PLEASE REMEMBER:
• Do not operate the product if under the influence of alcohol or drugs. Read warning labels
• Do not wear loose clothing or jewelry as they can be caught in moving parts.
• Wear restrictive hair covering to contain long hair.
WORK AREA
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE OR FIRE AND SHOCK:
• Do not use in wet or damp environments.
• Children should not be allowed into the work area.
SLICER FUNCTION
• The work area should well-lit clean, and free from obstructions.
times when operating this appliance.
• This unit contains a very sharp slicing Blade. Extreme caution should be used at all
• Keep your fingers, hands, hair and other body parts away from the Blade.
• Always use the "Protective Guide" and "Food Tray".
• Only use this slicer to cut soft food any other use will result in a hazard..
Do not run continuously for longer than 3 minutes. Turn it off and let it cool down
at least 5 minutes; otherwise the motor may become damaged.
CAUTION - Use of controls or adjustments or performance of procedures
WARNING - To reduce the risk of fire or electric shock, do not expose
Read all instructions before use and keep for future reference.
other than those specified herein may result in a hazard.
this appliance to rain or moisture or submerge into water.
PRECAUTIONS
To Maintain Optimum Performance
Do not use the unit in places which are extremely hot, cold, dusty or humid.
For safety
• Take care not to drop the unit or subject it to strong shocks.
allow children to use this appliance.
Children
• Children do not understand the dangers associated with operating electrical appliances. Never
strained or damaged as it creates a hazard.
Mains Lead
• If this unit has a mains lead or is connected with a mains adaptor do not allow the lead to become
Ventilation Warning
• Do not allow water or liquids to splash onto the main body as it contains live parts.
Electrical Requirements
Check that the voltage on the rating plate of your product corresponds with your house
• Do not cover the body with a cloth and allow the unit to be well ventilated.
electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this product, check
with a qualified electrician for replacement.
Page 3
1 x Food Slicer
A
Blade Adjustment
Knob
B
Safety Button
On/Off Button
E
Slice Thickness Gauge
Face Plate
D
C
Blade Assembly
F
G
Blade Lock
M
32
Platfrom
H
KNOW YOUR MACHINECONTENTS
4
Power Cord
J
1 x Food Tray 1 x Protective Guide
K L
...........................................................................................................
........................................................................................................... 6
Know Your Machine ......................................................................................... 3
Assembly
Specifications .................................................................................................. 10
Operation
Page 4
5
A
fig. 1
H
H
fig. 3
K
fig. 2
L
K
K.
A.
H.
NOTES:
ASSEMBLYASSEMBLY
- Please read the important safety
See fig. 1.
instructions before use.
Food Slicer
1. Unfold the Platform H from the
Platform
See fig. 2.
2. Slot the Food Tray K into the
See fig. 3.
the Food Tray
3. Slide the Protective Guide L onto
G and Food Tray K.
Before Operating
motor base, main body or platform in water or any other liquid. Only use the Food
Slicer on a dry, water-free work surface. Always stand on a dry, insulated surface
while using.
Protective Guide.
• Unplug appliance when not in use and before cleaning.
• Do not use appliance for uses other than those recommended.
• To protect against electrical shock, do not immerse cord, plug, motor, motor stand,
• Avoid contact with moving parts! Never feed food by hand. Always use the
is spinning during operation.
• Do not use the Food Slicer outdoors.
• The Blade is sharp. Be extremely careful when cleaning blade and when the blade
A QUALIFIED ELECTRICIAN
• Never use Steel Wool or scouring powder on any part of the Food Slicer.
• DO NOT MODIFY YOUR PLUG IN ANY WAY. IF YOU HAVE ANY DOUBT. CALL
the entire manual to become familiar with the unit BEFORE you set up the Food
Slicer.
After assembling the unit, test the Food Slicer by running several slices of day-
old bread through the Food Slicer to insure that all parts are working properly.
Clean the Food Slicer after every use. Failure to follow all cleaning instructions
thoroughly wipe off all parts with a clean cloth using warm soapy water and a
mild anti-bacterial detergent. In addition, the following parts should be cleaned
in hot soapy water: Protective Guide L, Blade Assembly
CAUTION: To reduce risk of health hazards; Before assembling the Food Slicer,
Food Hygiene
and warnings may result in serious illness due to food poisoning.
Assembly
- Your Food Slicer will require assembly prior to use. It is important that your read
after all subsequent uses.
- The Food Slicer must be cleaned, as described above, before the first use and
4
Page 5
7
G
fig. 8
C
Thumb Guard
OPERATIONOPERATION
5. Use your other hand to hold the
L
K
C. Then to cut the food slide
Protective Guide L with your
thumb protected behind thumb
guard. Apply gentle pressure onto
the Protective Guide to keep the
food pressed against the Face
Plate
the Food Tray K back and forth
See fig. 7.
steadily across the Blade
Assembly G.
fig. 7
.
behind the Protective Guide L
and clear of the spinning Blade
the forward motion.
NOTE: The Blade only cuts during
CAUTION: Keep fingers and hands
Assembly G
G
F
to zero.
E
See fig. 8.
of the unit to catch the food as it
is being sliced.
6. Place a Food Tray to the outside
fingers off of the Safety Button
and slide On/Off Button
7. To turn off the Food Slicer, take
E
F
fig. 4
B
clockwise for
Food Location
C
G. Place the food to be
fig. 5
fig. 6
L
K
voltage is 230V~ 50Hz.
NOTE: Make sure your local
mains socket.
1. Insert the Power Cord J into the
2. Set the Blade Adjustment Knob B
for the thickness of the slice that
you desire. Turn the Blade
Adjustment Knob B
thicker slices and counterclockwise
See fig. 4.
for thinner slices.
the Blade
sliced on the Food Tray K,
3. Slide the Food Tray K away from
See fig. 5.
positioned between the Face Plate
C and Protective Guide L.
the Blade Assembly G at all
times.
CAUTION: Keep fingers away from
slide the ON/OFF Button E, from
0 to 3. O is "off" 3 is "Maximum".
Then push the Safety Button F.
4. In order to turn on the Food Slicer
See fig. 6.
which relates to Slow, Medium,
5. Set the On/Off Button E to 1,2,3
See fig. 6.
Max Blade Speed. Adjust
depending on your requirements.
push down the Safety Button
F to keep the Blade spinning.
NOTE: You need to continually
6
Page 6
9
G
H
fig. 11
A
powder on any part of the Food
OPERATIONOPERATION
After Operation-Maintenance
Slicer.
1. Never use Steel Wool or scouring
L
K
, and Food
clean. Before assembling the Food
Slicer, and with the unit unplugged,
thoroughly wipe off all parts with a
clean cloth using warm soapy water
and a mild anti-bacterial detergent.
In addition, the following parts
, Blade Assembly G
should be removed and cleaned in
hot soapy water: Protective Guide
L
Tray K. Clean the Food Slicer after
2. Ensure the unit is hygienically
G
See fig. 11.
every use.
NOTE: Failure to follow all cleaning
fig. 12
, Fold up the
instructions could allow harmful
bacteria to grow and
contaminate food, creating a
serious health risk.
STORAGE:
Small Gear
and Food Tray K
Platform H against the Main Body.
Wrap up the Cord J and store it
- Remove the Protective Guide L
under the Food Slicer. The Food
Slicer should be stored in a
See fig. 12.
location that is out of reach of
children in a clean dry enviroment.
G
M
G.
is OFF and UNPLUGGED. Turn
removing or replacing the blade
as the edge may be very sharp.
CAUTION: Take care when
Removing and Replacing the Blade
CLEANING
the Blade Lock M clockwise to
1. Make certain that the Food Slicer
See fig. 9.
unlock it. Pull out the Blade
Assembly
M
fig. 9
with the slots in the
G, line up the tabs on the Blade
Assembly G
Small Gear. Once the Blade
after every use, clean the Blade
and Assembly.
CAUTION: Before first use and
2. To reinsert the Blade Assembly
Assembly is seated with the Small
See fig. 10.
Gear, turn the Blade Lock M
anticlockwise to lock it in position.
fig. 10
cut soft foods, Do not use to
cut frozen foods, bones or other
solid food types.
NOTE: Only use this appliance to
slicing.
For Best Results
- Chill meats thoroughly before
- Slice meats thinly.
if partially frozen.
- Meats should be boneless.
- Fish and thin steaks will slice better
- When slicing warm roasts, make
certain to remove all string before
slicing.
8
Page 7
Year
PRODUCT GUARANTEE
This product is guaranteed against manufacturing defects for a period of
This product is guaranteed for twelve months from the date of original purchase. Any
defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.
or consumable items.
The guarantee is subject to the following provisions:
- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs
MK9 2NW
Guarantor: Argos Ltd
Central Milton Keynes
489 - 499 Avebury Boulevard
instructions contained in this manual.
- The product must be correctly installed and operated in accordance with the
damaged by inexpert repair.
- It must be used solely for domestic purpose.
- The guarantee will be rendered invalided if the product is re-sold or has been
- Specifications are subject to change without notice.
- The manufacturer disclaims any liability for the incidental or consequential damages.
- The guarantee is in addition to, and does not diminish your statutory or legal rights.
BROWN
(LIVE)
CABLE
BLUE
GRIP
(NEUTRAL)
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH
YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
Technical Data
Model no. 422-8211
Power Supply 230VAC-50Hz
Blade Stainless Steel
Blade RPM 95
Blade Diameter 6-1/2"
Slice Thickness Adjustable 0-15mm
SPECIFICATIONS
Weight 4kg
Never connect live or neutral wires to the earth terminal of the plug.
WARNING :
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
If in doubt, consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured as follows:
Blue-Neutral
Brown-Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal, which is marked with N or coloured blue. The wire which is coloured
brown must be connected to the terminal which is marked L or coloured brown.
Always ensure that the plug cord grip is fastened correctly. If a 13A (BS1363)
If you need to replace the fitted plug.
Check that the voltage marked on the product corresponds with your supply voltage.
Connecting to Power
This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable
Plug Replacement
or needs to be replaced, please note the following :
fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be
ASTA approved. If in doubt contact a qualified electrician.
10
Page 8
ATTENTION !!!
The below two warnings must be added to the
product by the separate paper or amend the
instruction.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Loading...