CookTek MW3500G, MWDG3500, MWG3500, MC3502FG, MCD3500G User Manual
...
CookTek Induction Systems, LLC
Phone: |
1-800-908-8726 |
|
+1 214-379-6000 |
Fax: |
+1 214-379-6073 |
www.cooktek.com
customerservice@turbochef.com
INSTALLATION ● OPERATION
OWNER’S MANUAL
CookTek Cooktops and Wok Units
CAUTION: Read all instructions before using this appliance.
Models MC1800, MCD1800, MC2500,
MCD2500, MC3000, MCD3000, MC3500,
MCD3500, MC2502F, MCD2502F, MC2502S, MCD2502S, MC3002F, MCD3002F, MC3002S, MCD3002S, MC3502F, MCD3502F, MC3502S, MCD3502S, MWG1800, MWDG1800, MWG2500, MWDG2500, MWG3000, MWDG3000, MWG3500,
MWDG3500, MWG5000-200, MWG5000-400
CookTek Induction Systems, LLC
Phone: 1-800-908-8726 +1 214-379-6000 Fax: +1 214-379-6073
Web: www.cooktek.com
Email: customerservice@turbochef.com
CT-102922 / Jan 2017
preparing your cooktek cooktop for use
CAUTION: Read all instructions before using this appliance.
Before operating your cooktop, do the following:
•Remove all packing material and save for subsequent shipment or in case of concealed shipping damage.
•Place the unit on a dry, level, hard, stable, and non-flammable surface.
•Keep unit away from other heat sources. See “Spacing Requirements” on page 3 of this manual for detailed spacing and clearance information for all cooktop units.
Grounding Instructions:
The cooktop must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing a safe path for the electric current. The cooktop has a power cord with a 3-prong grounding plug, which must be used in a compatible and properly grounded outlet. It is the owner’s responsibility to replace any 2-prong wal loutlet with a properly grounded 3-prong wall receptacle.
For your safety, never cut, remove, or disable the electrical (ground) connection from the plug. Never use an adapter plug or an extension cord with the cooktop.
WARNING: Electric shock can result from an improperly grounded plug. Please consult a qualified electrician if you have any questions about these grounding instructions.
Before you begin:
Some units may come equipped with a removable IEC power cord. Please make sure that this power cord is firmly attached to your CookTek unit BEFORE plugging the unit into the power receptacle and before attempting operation.
electrical installation requirements
Every installation site has different electrical wiring. Because many different local codes exist, it is the Owner and Installer’s responsibility to comply with those codes. CookTek is not responsible for any consequential damages as a result of failure to comply with installation requirements.
•Read all installation instructions carefully before starting installation.
•Remove cooktop carefully from carton.
•Remove all loose packaging and accessories and save for subsequent shipment or in case of concealed shipping damage.
•It is the responsibility of the installer to comply with all federal, state and local codes.
•Any installation not matching the specifications discussed in this manual automatically voids the product’s warranty.
•CookTek recommends that a dedicated electrical line be used for each cooktop installed. Electrical circuits should not be shared with any other electrical equipment.
•O aparelho deve estar ligado à terra. Ligue apenas a uma tomada correctamente ligada à terra. Antes de funcionar com o aparelho, leia as instruções relativas à ligação à terra e os Requisitos para Instalação Eléctrica na Página 1 deste folheto. Não utilize um cabo de extensão.
SPANISH
Antes de utilizar el anafe (cooktop), realice lo siguiente:
•Retire todo el material de embalaje.
•Coloque la unidad sobre una superficie seca, plana, dura, estable y no inflamable.
•Mantenga la unidad alejada de otras fuentes de calor y deje un margen de al menos 5 cm para que el aire circule por los lados y las partes anterior y posterior de la unidad.
Por su seguridad, nunca corte, quite ni inutilice la conexión eléctrica (tierra) del enchufe. No utilice nunca el anafe con un enchufe adaptador ni un cable prolongador.
ADVERTENCIA: Se puede producir un choque eléctrico por un enchufe conectado a tierra de manera incorrecta. Si tiene alguna duda relacionada con las instrucciones de conexión a tierra, póngase en contacto con un electricista cualificado.
Antes de comenzar:
Asegúrese de que el cable eléctrico está unido firmemente a la unidad CookTek ANTES de conectar la unidad a la electricidad y antes de intentar utilizarla.
•No toque la placa cerámica (situada en la parte superior del anafe) inmediatamente después de utilizarla. El calor de la cazuela se transferirá a la placa cerámica y hará que ésta se caliente.
•La revisión de este producto únicamente puede realizarla un operario de mantenimiento autorizado o el personal de CookTek. No intente abrir la unidad ni realizar ninguna labor de mantenimiento. Para obtener información sobre el mantenimiento, póngase en contacto con CookTek llamando al +1 214-379-6000.
•Este aparato se debe conectar a tierra. Enchúfelo únicamente a una toma conectada a tierra de manera adecuada. Antes de utilizarlo, lea las instrucciones de conexión a tierra y los “Requisitos de la instalación eléctrica” de la página 1 de este folleto. No utilice cables prolongadores.
1 |
18 |
Przed rozpoczęciem używania:
Należy sprawdzić, czy przewód zasilania jest pewnie przymocowany do modułu CookTek PRZED podłączeniem urządzenia do gniazdka zasilania i przed rozpoczęciem jego używania.
•Nie dotykać płyty ceramicznej (lub wierzchniej części urządzenia Cooktop bezpośrednio po zakończeniu jego używania. Wysoka temperatura patelni może przenosić się na płytę ceramiczną, stwarzając możliwość oparzenia w przypadku jej dotknięcia.
•Obsługa serwisowa tego produktu może być prowadzona jedynie przez upoważnionego pracownika serwisu lub przez personel firmy CookTek. Nie podejmować samodzielnej próby otwarcia urządzenia ani nie wykonywać żadnych napraw. Aby uzyskać informacje dotyczące obsługi serwisowej, należy skontaktować się z firmą CookTek pod numerem +1 214-379-6000.
•Niniejsze urządzenie wymaga uziemienia. Podłączać jedynie do właściwie uziemionego gniazda. Przed użyciem należy przeczytać instrukcję dotyczącą uziemienia oraz część „Wymogi instalacji elektrycznej” na stronie 1 niniejszej ulotki. Nie używać przedłużacza.
portuguese
Antes de funcionar com o seu Cooktop, faça o seguinte:
•Retire todo o material de embalagem.
•Coloque a unidade numa superfície seca, nivelada, rígida, estável e não inflamável.
•Mantenha a unidade afastada de outras fontes de calor e deixe um espaço de pelo menos 5 cm nos lados, frente e traseira da unidade, para circulação do ar.
Para sua segurança, nunca corte, retire nem desactive a ligação eléctrica (terra) da ficha. Nunca utilize uma ficha adaptadora nem cabo de extensão com o Cooktop.
ADVERTÊNCIA: Uma ficha incorrectamente ligada à terra pode provocar choque eléctrico. Se tiver alguma questão sobre estas instruções de ligação à terra, por favor consulte um electricista qualificado.
Antes de Começar:
Por favor, certifique-se de que este cabo de energia está ligado firmemente à sua unidade CookTek ANTES de ligar a unidade à tomada de energia e antes de tentar funcionar com ela.
•Não toque na placa de cerâmica (no cimo do Cooktop) imediatamente depois da sua utilização. O calor emitido pelo tabuleiro será transferido para a placa de cerâmica, fazendo com que esta fique quente ao toque.
•A assistência técnica deste produto só pode ser realizada por um agente de assistência técnica autorizado ou por pessoal da CookTek. Não tente abrir a unidade nem efectuar assistência técnica de qualquer tipo. Para informações referentes à assistência técnica, por favor entre em contacto com a CookTek pelo telefone 1-214-379-6000.
Installation Guidelines for all cooktops and woks
Please follow the listed guidelines below to ensure product reliability: Spacing Requirements:
•All units require a minimum clearance of two 2” (51 mm) between all sides of the housing and any surface or obstacle.
•All drop-in units require a minimum clearance of open space below the unit of 6” (152 mm). The space must have openings allowing for the flow of cool air (ambient temperature not to exceed 50˚C/122˚F) to the cooktop housing intake vents. If either the air intake or exhaust outlet is blocked, the internal temperature will
rise, causing an error code to occur (NOTE: The 6” (152 mm) can be reduced if additional fans and ducting are added to provide forced ventilation).
•Avoid installing the unit near other equipment that generates excessive heat that can be pulled into the CookTek unit by its fan (i.e. griddles, fryers, etc.).
•Avoid placing the unit near items that generate excessive steam that can be pulled into the CookTek unit by its fan (i.e. pasta cookers, steam baths, dishwashers, etc.).
Electrical Requirements:
•Line voltage should never exceed 264VAC for 240VAC units and 132VAC for 120VAC units.
•Always provide a dedicated electrical circuit for the equipment.
•Never use an extension cord or power strip.
General Maintenance:
•If your unit comes equipped with a grease filter on the bottom of the unit, please read the section on cleaning and maintenance of the grease filter (page 5).
•All units should be checked for build up and debris around the intake and exhaust vents on the bottom of the unit.
•If debris is found on the vents, you should unplug the unit and clean away the
debris with a dry cloth to ensure proper airflow is provided to the equipment.
Air Flow and Ambient Temperature:
•Avoid ambient temperatures exceeding 50˚C/122˚F.
•Units dropped into the counter will require the following:
•Single units require a minimum 70CFM (2.0m3/min) of fresh air to the unit
•Double units require a minimum of 140CFM (4.0m3/min) of fresh air to the unit.
General:
•Never leave an empty pan on the unit.
•Always turn the unit off when not in use.
Installation of drop-in cooktops and woks
•When installing the drop-in cooktop or wok, use the dimensions provided in this manual to trace the cutout dimensions onto the countertop.
•All drop-in units require a minimum clearance of open space below the unit of 6” (152 mm). The space must have openings allowing for the flow of cool air (ambient temperature not to exceed 50˚C/122˚F) to the cooktop housing intake vents. If either the air intake or exhaust outlet is blocked, the internal temperature will
rise, causing an error code to occur (NOTE: The 6” (152 mm) can be reduced if additional fans and ducting are added to provide forced ventilation).
•Cut out and drill holes as required in countertop.
•Drill holes for control box mounting.
17 |
2 |
Loading...