CookTek IHW06236, IHW06226, IHW06266 Specifications
Proj ect _______________________________________________________
Item No. ______________________________________________________
Q u a n t i t y _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _______________________________________
RECTANGULAR SINAQUA™
RECTANGULAR SINAQUA™
Drop-in Waterless Buet Warmer
Two-sensor unit includes
two controllers
FEATURES
n
Available in the following congurations
- 2.5” depth available with two sensors
- 4” depth available with two, three, or six sensors
- 6” depth available with two, three or six sensors
n
Number of sensors determines what pans can be accommodated
- Two sensors (two temperature zones/two controllers) can
accommodate standard hotel or gastronorm pan or up to two
half-size pans
- Three sensors (three temperature zones/three controllers) can
accommodate standard hotel or gastronorm pan or up to three
1/3 pans
- Six sensors (three temperature zones/three controllers) can
accommodate standard hotel or gastronorm pan, up to three 1/3
pans, or up to six 1/6 pans
n
Waterless design – no water or drains needed
n
Drop-in design with aluminum housing and a high-impact,
easy-to-clean polycarbonate interior surface
n
Four standard set temperatures with more temperatures available
via controller
n
LED display
n
Automatic pan detection allows for instant energy transmission to pan;
almost no energy consumption when pan is not present
n
Lock feature prevents unwanted setting changes
n
Microprocessor monitors vital components to check for overheating,
power supply issues, and more
n
Standard Cat 5e or Cat 6 patch cable from unit to control box included
n
Available in 100–120 VAC or 200–240 VAC, single phase
n
Includes plug and cord (6 ft. nominal)
n
One-year limited parts and labor warranty – U.S. and Canada
Three and six-sensor units
include three controllers
PERFORMANCE
The CookTek® Drop-in SinAqua™ is a
waterless buffet warmer featuring an
aluminum housing and a high-impact
polycarbonate interior surface. The
SinAqua™ requires no water lines or drains
and has precise temperature holding for
each pan to maximize food quality. Each
unit is programmed with an automatic pan
detection feature to ensure maximum and
efficient warming of induction-compatible
pans.*
ACCESSORIES (NOT INCLUDED)
n
Stainless Steel Counterop Housing for Two-Sensor Unit (Part # 302049)
n
Stainless Steel Counterop Housing for Three and Six-Sensor
Units (Part # 302050)
302049
302050
CERTIFICATIONS
*SinAqua Drop-in Buet Warmers are designed to be used with induction-compatible pans.
It is the owner and installer’s responsibility to comply with all local codes. CookTek reserves the right
to make substitutions of components or change specications without prior notice.
DOC-1644/Revision C/
May 2018
2.5” DEPTH
20.25”
(514 mm)
21.75” (552 mm)
6.20”
(157 mm)
2.5” Depth Side View
21.75” (552 mm)
13.75”
(349 mm)
Two (2) Sensor Top View
2.5” DEPTH DIMENSIONS
Full Unit Height 6.20” 157 mm
Full Unit Width 13.75” 349 mm
Full Unit Depth 21.75” 552 mm
Internal (Usable) Height 2.5” 64 mm
Internal (Usable) Width 12.26” 311 mm
Internal (Usable) Depth 20.18” 513 mm
Cutout Width 12.25” 311 mm
Cutout Depth 20.25” 514 mm
Weight 17 lb. 7.7 kg
CLEARANCE
Front 2” 51 mm
Sides 2” 51 mm
Rear 2” 51 mm
Below 6” 152 mm
SHIPPING INFORMATION
Packaged Height 12” 305 mm
Packaged Width 18” 457 mm
Packaged Depth 24” 610 mm
Packaged Weight 25.9 lb. 11.7 kg
Item Class 250 NMFC #26710
12.25”
(311 mm)
Countertop Cutout Dimensions
3.26”
(83 mm)
2.25”
2.90”
(74 mm)
(57 mm)
1.91”
(49 mm)
3.81”
(97 mm)
2.46”
(62 mm)
Controls Cutout Dimensions (Two-Sensor Unit Includes Two Controllers)
ELECTRICAL SPECIFICATIONS SINGLE PHASE
UNITED STATES/CANADA
2 Sensor (IHW061-22) 635701 100–120 V, 50/60 Hz, 650 W NEMA 5-15P
2 Sensor (IHW062-22) 635801 200–240 V, 50/60 Hz, 650 W NEMA 6-20P
Dedicated circuit required for each installation.
NEMA 5-15P
NEMA 6-20P
© 2018 CookTek®
Loading...