IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
When using an electrical appliance, basic safety precautions should always be followed,
including the following:
www.maxi-matic.com
1
info@maxi-matic.com
The Elite Brand takes consumer safety very seriously. Products are designed and
manufactured with our valued consumers' safety in mind. Additionally, we ask that you
exercise a level of caution when using any electrical appliance by following all
instructions and important safeguards.
1. Read all instructions before use, and keep for future reference.
2. To protect against electric shock, do not immerse cord, plug or motor in water or
any other liquid.
3. Close supervision is required when any appliance is used by or near children.
4. Avoid contact with moving parts.
5. In order to reduce the risk of injury to person or damage to the appliance, keep
hands and utensils out of removable container during operation. Do not use sharp
objects or utensils inside the removable container.
6. Do not clean the removable container and fixed bowl with cleanser, steel wool pads
or other abrasive materials.
7. Remove plug from wall outlet when not in use and before putting on or removing
parts, and before cleaning.
8. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner.
9. The use of accessories not recommended by the manufacturer may cause fire,
electric shock, or injury.
10. Do not use this appliance outdoors.
11. Do not let cord hang over the edge of table or counter or touch heated surfaces such
as the stove.
12. Do not place appliance on or near hot gas or electric burner or in a heated oven.
13. Do not use the appliance for other than intended use, as per this instruction manual.
14. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been dropped or damaged in any manner. See warranty to
return for examination, repair, or replacement.
15. Do not place hot foods or liquids into the ice cream maker.
16. Close the lid immediately after adding ingredients so the inside temperature will
not rise dramatically.
17. Keep appliance away from any heat source or direct sunlight.
18. The appliance must be placed on a flat and solid surface during operation and in
storage.
19. Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from
the outlet.
20. Never lift or carry the maker by the cord.
21. Keep the cord away from heated surfaces.
CAUTION: Keep product away from open flames.
22.
23.
DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection
of E-WASTE is necessary.
SHORT CORD PURPOSE
NOTE:
Longer power-supply cords or extension cords are available and may be used if care is
exercised in their use.
POLARIZED PLUG
polarized plug
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY
www.maxi-matic.com
2
info@maxi-matic.com
A short power cord is provided to reduce the risk of personal injury resulting from
becoming entangled in or tripping over a longer cord.
If an extension cord is used: (1) the marked electrical rating of the extension cord should
be at least as great as the electrical rating of the product; (2) the extension cord should
be arranged so that it will not drape over the countertop or tabletop where it can
unintentionally be pulled on or tripped over by
If this appliance is equipped with a
please follow the below instructions:
To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet
only one way. If you are unable to fit the plug into the electrical outlet, try reversing the
plug. If the plug still does not fit, contact a qualified electrician. Never use the plug with
an extension cord unless the plug can be fully inserted into the extension cord. Do not
alter the plug of the product or any extension cord being used with this product. Do not
attempt to defeat the safety purpose of the polarized plug.
children or pets.
(one blade is wider than the other),
PARTS IDENTIFICATION
1. Top Cover
9. AC Adaptor
www.maxi-matic.com
3
info@maxi-matic.com
2. Top Lid Lining
3. Mixing Motor
4. Motor Release Button
5. Ice Cream Paddle
6. Housing
7. Inner Bowl
8. Back Cover
10. Control Panel
11. Ice Cream Scoop
12. Spatula
BEFORE FIRST USE
CAUTION
HOW TO USE YOUR ICE CREAM MAKER
Preparation of Ice
Cream Mixture:
Figures 3 - 4
Figures 1 - 2
www.maxi-matic.com
4
info@maxi-matic.com
1. Remove all interior and exterior packaging materials.
2. To remove the Mixing Motor (3) from the Top Cover (1), lift upwards on the motor (3)
at the same time
as pressing down
on the Motor
Release Button (4).
(See figures 1 - 2).
3. Remove the
Paddle (5) by
pulling it out of
the shaft of the
motor (3). Turn
top cover (1)
counter-clockwise
to unlock and remove.
Use warm, soapy water to clean the Inner Bowl (7), transparent top cover (1), top lid
lining (2) and paddle (5) of ice cream maker before using.
: Do NOT wash the Mixing Motor (3). Wipe Mixing Motor (3) with damp
cloth.
4. Ice Cream Maker must be set upright on a horizontal surface for at least 5 hours after
purchase or after transit.
1. Place the Ice Cream Maker on a stable and flat surface and allow for proper air
circulation through Ventilation Grills on all sides of the main body.
2. Assemble mixing motor (3) back onto top cover (1) and insert the paddle (5) into the
spindle of the mixing motor (3) until it clicks into place.
3. Connect the AC adaptor
(9) to an electrical
outlet and to the back
of the main body (See
figures 3 - 4).
4. Prepare Ice Cream
Mixture.
• Select your recipe and prepare the mixture.
• When using ice cream powder to make ice cream, please operate according to
the instructions on the package of the ice cream powder.
• Use ingredients free of any inedible materials such as seeds, peels or pits.
• Always chill the ingredients in your refrigerator before pouring into the
machine. This will reduce the time required to make the ice cream.
HOW TO USE YOUR ICE CREAM MAKER
NOTE:
Underside of Mixing Motor (3)
Figure 5
Figures 6 - 7
Hard Soft Stop
www.maxi-matic.com
5
info@maxi-matic.com
(cont).
• Do not exceed the MAX fill line marking within the Inner Bowl when using
ingredients that expand. This will allow the volume to increase during freezing
to fit the bowl’s maximum capacity.
5. Pour ice cream mixture into inner bowl (7).
6. Place assembled top cover (1) onto the ice
cream maker by ensuring the metal pins
underneath the mixing motor (3) (see figure 5)
make contact with the magnetic switches on
the main body of the ice cream maker (See
figures 6 - 7).
The motor (3) will not function if the magnetic switches are not activated by
the metal pins. It will also switch off the motor power automatically if the motor (3)
separates from the magnetic switches.
7. Turn clock-wise to lock the top cover (1) in place.
8. Press either the HARD or SOFT button to begin operation. The motor (3) will begin
turning and the unit will begin freezing.
The HARD setting is for thicker ice cream consistency
The SOFT setting is for Soft-Serve ice cream consistency .
9. Depending on the quantity and type of ingredients used as well as the ambient
temperature, the unit will take between 45-120 minutes to make ice cream.
10. The ice cream maker will beep once the ice cream is ready and the paddle is no
longer able to turn.
11. Press the STOP button to cancel operation.
Figure 9
Figure 8
HOW TO USE YOUR ICE CREAM MAKER
WHEN FINISHED:
CAUTION
CLEANING AND MAINTENANCE
WARNING:
CAUTION
TIP:
www.maxi-matic.com
6
info@maxi-matic.com
(cont).
If the paddle does not rotate anymore due to the hardness of the ice cream, press
the STOP button and remove the paddle immediately to avoid the paddle freezing
into the ice cream.
Do not turn the motor (3) off unless the ice-cream is ready. If the motor is shut off
too early, the mixture may freeze onto the inner bowl (7).
The freezing times for recipes may vary due to different room temperatures. If the
mixture freezes quicker, turn off the motor and immediately remove the paddle.
(The times listed in the recipe section are estimates.)
1. Unplug the power cord from wall socket.
2. Remove the motor (3) and unlock the top cover (1) by turning it counter-clockwise.
Set them aside. The paddle (5) should be inside the ice cream bowl. Remove the
paddle and scrape off any ice cream stuck to the paddle (5).
3. Use scoop or spatula (included) to spoon out ice cream from inner bowl (7) into a
freezer-safe container or serve immediately.
: Do not use metal utensils to stir or scoop your ice cream in the inner bowl
(7) as this may damage the surface of the bowl.
To avoid the risk of electrical shock, always ensure the product is unplugged
from the electrical outlet before assembling, disassembling, relocating, servicing, or
cleaning it.
Before cleaning, make sure that the machine has had sufficient time to reach room
temperature.
Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
1. Wipe exterior with damp, soapy cloth and then dry with a clean towel.
2. Wash the top cover (1),
top lid lining (2) and
paddle (5) in warm,
soapy water.
: Do NOT wash
the Mixing Motor (3).
Wipe Mixing Motor (3)
with damp cloth.
To remove the top
cover (1) from the top
lid lining(2), pinch the tabs shown in figure 8 and then
pull the top lid lining (2) away from the top cover (1)as
shown in figure 9.
3. Rinse and dry.
4. Wash inner bowl (7) with warm soapy water and rinse.
Avoid water contact with the vents on the back cover (8).
Do not place any parts of the machine in the dishwasher.
CLEANING AND MAINTENANCE
WARNING: NEVER SUBMERGE THE ICE CREAM MAKER INTO
WATER OR ANY OTHER LIQUID AS THIS MAY DAMAGE THE
UNIT.
TROUBLESHOOTING
Symptoms
Possible Causes
Solutions
Make sure you have followed the
underneath the motor (3).
Keep the appliance away from
in operation.
www.maxi-matic.com
7
info@maxi-matic.com
(cont).
instructions in the manual on
The ice cream
maker does not
power on.
The motor is assembled
incorrectly.
how to assemble the motor (3)
and top cover (1) to the body and
that the magnetic switches are
activated by the pins found
The ice cream
maker isn't
freezing the ice
cream.
The appliance is placed
too close to a heat source.
No sufficient ventilation.
The lid is opened too
frequently.
direct sunlight or other heat
sources.
Place the ice cream maker in an
area with good ventilation and
leave 6" of clear space on all sides
of the vents.
Close the lid tightly and do not
open the lid too frequently while
Loading...