
Press tabletop down firmly making sure it is level and fully secured.
Important: Prior to attaching the Workstation, verify that your safety stand is properly assembled. Make sure the base plate is flat against the floor
(See figure 3A) and the upright back support is facing away from cylinder (See figure 3B).
Safety Stand Add-On Workstation
Assembly Instructions
Parts List:
2 Support Arms
1 Workstation Table-Top
Place workstation tabletop face-down and insert support arms into
holding pins.
Use a flat blade screwdriver to remove the black plastic caps from the
top of the safety stand uprights. Invert table and slide support arms into
safety stand uprights.
2
1
3
A
B
Conwin’s Tools of the Trade Video
ConwinOnline.com
Our site features Conwin’s complete line,
balloon galleries, inspirational ideas, seasonal designs, step-by-step projects, and
so much more.
Visit www.ConwinOnline.com today!
Learn more about the entire line of Conwin
products from the popular Precision
Air Inflator to the spectacular
Confetti Cannon! You'll also see
many award-winning productions
by leading balloon artists! Visit
ConwinOnline.com’s Education Center
to see our complete line of videos.
Designs
Galleries
Projects
...and more!
Online

Cylinder
Baseplate
Cylinder
Support
Upright
Velcro
®
Safety Belt
ACCESSORIES
• Precision Plus Inflator (Conwin #83000)
Automatically inflate foil balloons to the proper
pressure and size. Features separate outlet for
latex balloon inflation.
• Tank Top Cylinder Cover (Conwin #32000)
Maintain a professional look in the store or on
the job with Conwin’s decorative cylinder cover.
• 3-Pocket Balloon Caddy (Conwin #32020)
Create an instant workstation around cylinder
with Conwin’s Balloon Caddy. Adjusts to any
size cylinder and holds balloons, ribbons, discs,
balloon weights, etc. Features durable nylon
mesh pockets.
• Cylinder Safety Stand Workstation Add-On
(Conwin #30140). Creates an efficient and
convenient workstation for tools and supplies.
Cylinder Safety
Stand Workstation
Add-On
(See Reverse Side)
Using the wrench supplied,
attach the upright to the baseplate and firmly tighten the
bolts.
Place Velcro
®
Safety Belt on hook with fuzzy side
facing outward.
Roll the cylinder into the safety stand until it is
touching the upright supports. Orient the cylinder
valve outlet so it is facing to the left. Place bottom
Velcro® safety belt around cylinder and through
loop. Tighten belt securely. Repeat with top belt.
Cylinder should be very tightly attached to stand.
32
4
Cylinder Safety Stand
Assembly Instructions
Parts List:
2 Velcro®Safety Belts
1 Cylinder Baseplate
1 Cylinder Support Upright
2 Bolts
1 Wrench
Position upright with “This Side to Cylinder” label facing inward,
toward front of Safety Stand.
1
Visit www.ConwinOnline.com today!
Our site features Conwin’s complete line, balloon galleries,
inspirational ideas, seasonal designs, step-by-step projects,
and so much more.
04032002