Conwin RIBBON DISPENSERS Instruction Sheet

Page 1
Ribbon Dispenser
Instruction Sheet
8-Spool Ribbon Dispenser
ersatile unit mounts on wall or cylinder.
V
pecial bracket is included to hang from
S any size cylinder.
Design Features
Top Feed Ribbon Organizer
Ribbons feed up from the center of the dispenser to the top organizer with individual guide holes. This insures that the ribbons do not tangle and allows the user to quickly select the desired color. The Top-Feed Organizer also allows for all ribbons to be pulled simultaneously for pre-cutting.
Loading Ribbon Dispensers
20-Spool Ribbon Dispenser
Compact free-standing unit features two ribbon cutters. Ideal for in the store or on-the-job decorating.
Convenient Ribbon Cutter
Both of Conwin's ribbon dispensers feature convenient ribbon cutters. The cutters are designed with a concealed blade for user protection. When blade becomes dull, the entire unit unscrews for easy replacement.
Conwin #35800 (Replacement 4-pack)
1. Place spools on dispenser with all ribbons feeding up the center of the rack. Feed each ribbon through the top plate. There is a guide hole for each spool of ribbon.
2. Rubber bands prevent the spools from free-spinning and hold the ribbons in place when transporting the dis-penser. Stretch the rubber bands over the spool arms using one rubber band for ever
wo spools.
y t
Tips For Best Results
1. Use your ribbon dispenser as a balloon holder. The weight of the dispenser will hold inflated balloons until needed–just tie balloons to ribbons and wait to cut the ribbons until desired.
2. Replace the ribbon cutters regularly. A sharp blade saves time and increases productivity. Replacement Ribbon Cutters (Conwin #35800) are available in 4-packs from your authorized Conwin Distributor
3. Pre-cut sever desired ribbon length. Place the ribbon dispenser at the edge of the mark and pull all ribbons simultaneously. Cut ribbons with scissors.
al ribbons at once. Mark a table or counter top with a
.
Page 2
8-Spool Ribbon Dispenser Mounting Instructions
Wall-Mounting Instructions
Cylinder-Mounting Instructions
Conwin #32120
1. Hold the dispenser against the wall race outline of mounting holes with a
t pencil. Drill a pilot hole in the wall. Select the appropriate drill bit size based on the size of the anchor insert or the size of the
ood screw.
w
2. When mounting the dispenser on
drywall, insert the Drywall Anchor insert into the pilot hole.
3. Place dispenser over pilot holes or
anchors and screw into place. Important: Leave approximately 1/4" between the head of the screw and the wall. The key hole wall mounts enable the dispenser to be easily removed from the wall to place on a cylinder or to take on a job.
4. See reverse side for loading
instructions and tips.
1. Secure the cylinder in a Conwin Cylinder Safety Stand before using this product.
2. Place the dispenser mounting bracket over the top of the cylinder.
3. Pinch the sides of the bracket together.
4. Slide the dispenser over the hooks just below the key hole located on the back of the dispenser.
Mounting Screws for Dispensers
Wood Screw
Anchor Insert
Mounting on a Wood Surface:
• Drill an 1/8” pilot hole.
• Mount with screw provided.
Mounting on a Drywall Surface or Counter Top:
• Drill a 1/
• Insert the anchor into the pilot hole.
• Mount with screw provided.
SSeerrvviiccee &&WWaarrrraanntty
For assistance with service & repair issues, or for warranty information,
please visit or call
4” pilot hole.
CCoonnwwiinnOOnnlliinnee..ccoomm
((881188))224466..99223333
y
,
Conwin Products for Ribbons
Grip-It Balloon Holder
Online
Projects
Designs
Galleries
...and more!
03312006
Conwin’s
Update Y
A picture is worth a thousand words. Is your portfolio up to date on the latest? Conwin’s P the perfect solution for making winning presentations to your clients. Thirty-two photo qualit the full series.
Visit www.ConwinOnline.com today!
PPoorrttffoolliioo BBuuiillddeerrss
our P
ortfolio Builder images are
y images are available in
Grip-Tabs 100-Pack
Grip-Strips 1
ortfolio!
0-P
ack
Loading...