Conwin Portable Power Pack (220v Euro Model) User Manual

Conwin Portable Power Pack (220v Euro Model)

Instructions

1. Charging your Power Pack - Plug the battery charger into a 220v outlet (in the UK, use the pro­vided plug adaptor); plug the charger line into the socket located at the back of the Power Pack.
Leave the unit off when charging (the red portion of the button should not be visible). The unit is
fully charged when the meter reads 12 volts (approximately 5-8 hours for a full charge). For best
results, charge the Power Pack 8 hours prior to use. The battery can be recharged at any level.

2. Verify the Power Pack is Fully Charged - To verify the Power Pack is fully charged and ready
for use, turn the power switch to the ON position (with the red portion of the button showing).
The consumption meter should read 12 Volts. A fully charged Power Pack will provide over
5 hours of continual use with Conwin’s Dual Split-Second Sizer or Duplicator 2.

Tips For Best Results: The Power Pack is designed exclusively for use with the Dual Split-Second Sizer and the Duplicator 2. The Power Pack is
not recommended for use with the Precision Air, Air Force 4, or other electrical products that have large electrical requirements.

IMPORTANT: Turn the unit OFF when not in use (the red portion of the power button should not be visible), conserving the battery and maximizing usage time.

SSeerrvviiccee &&WWaarrrraanntty

For assistance with service & repair
issues, or for warranty information,

please visit
or call

CCoonnwwiinnOOnnlliinnee..ccoomm

((881188))224466..99223333

y

Online

Projects

,

Designs

Galleries

...and more!

06062006

Conwin’s

Update Your Portfolio!

A picture is worth a thousand words.
Is your portfolio up to date on the latest?
Conwin’s Portfolio Builder images are
the perfect solution for making winning
presentations to your clients. Thirty-two
photo quality images are available in
the full series.

Visit www.ConwinOnline.com today!

PPoorrttffoolliioo BBuuiillddeerrss