Cutting Neon Foam Wire Attaching Neon Foam Wire
Neon Foam Wire
Bright Bold and Original!
Available in 9 Colors
Conwin #32260 Red
Conwin #32250 Blue
Conwin #32240 Pink
Conwin #32220 Orange
Conwin #32230 Purple
Conwin #32200 Green
Conwin #32210 Yellow
Conwin #32270 White
Conwin #32280 Black
Designer Tips:
• Neon Foam Wire in letters and
shapes, use cool glue gun to secure in
place.
• Use Spray paint to create custom colors of Neon Foam
Wire. Start with the closest base color available. For
example, start with yellow foam wire if you are going to
use gold spray paint.
See other side for great I DEAS for using Neon Foam Wire!
Use wire cutters to cut Neon Foam Wire. Push the foam wire
down and cut only the inner wire. The foam will spring
back into place and leave a soft tip at the end of the wire.
This provides a finished look and prevents the wire from
popping balloons.
To attach Neon Foam Wire to balloons, tightly wrap the
foam wire around the neck of the tied balloon just below
the knot. Helium-filled 1 1 inch balloons will lift and support
the weight of the foam wire. The foam wire will support airfilled 5-inch balloons.
✄
snip
push
Important: Before using Neon Foam Wire in floral and balloon arrangements, always cut the inner wire back to leave a soft tip of foam at the end of each length.
Conwin’s Tools of the Trade Video
ConwinOnline.com
Our site features Conwin’s complete line,
balloon galleries, inspirational ideas, seasonal designs, step-by-step projects, and
so much more.
Visit www.ConwinOnline.com today!
Learn more about the entire line of Conwin
products from the popular Precision
Air Inflator to the spectacular
Confetti Cannon! You'll also see
many award-winning productions
by leading balloon artists! Visit
ConwinOnline.com’s Education Center
to see our complete line of videos.
Designs
Galleries
Projects
...and more!
Online
Visit www.ConwinOnline.com today!