
Add-On Workbench Instructions
1 2
Lift the Workbench support arm over the back of the 4-Wheel Hand
Truck and hook the mounting bracket to the back frame of the hand
truck. The support arm frame will point at a 45 degree angle to the
ground when it is properly attached to the hand truck.
3
Button Locks
Rear Wheel
Carriage
4
Position the cylinder on the hand truck touching the back support. Firmly tighten the Velcro
safety belt to properly secure the cylinder in place.
Push the release button to lower the
rear wheel carriage.
IMPORTANT: Make sure the
release button locks into the second setting hole to secure the rear
wheel carriage in the tilt-back
position.
hand truck and place your foot on
the rear wheel carriage. Slowly
lower the cylinder back on the rear
wheels to the tilt-back position.
Firmly grip the top of the
®
Service & Warranty
For assistance with service & repair
issues, or for warranty information,
please visit
or call
ConwinOnline.com,
(818)246.9233
Online
Projects
Designs
Galleries
...and more!
Slide the W
the cylinder. For added convenience, Conwin’s Balloon Caddy
pockets can be placed on the side bars of the Workbench. The
side bars are also ideal for holding scissors, or to use as a t
point for Conwin’s Dacron Archline.
orkbench table on the support arms until it touches
ying
Conwin’s Masterpiece Series Videos
These exciting instructional videos
feature the industry's top balloon
artists sharing their secrets of the
trade on everything from the latest
decorating techniques to business
management and marketing skills.
Visit ConwinOnline.com to see our
complete line of educ
ational videos.
07082004
Visit www.ConwinOnline.com today!