Conveyor Technologies TABLE TOP VISION SYSTEM User Manual

►CTI Vision System Software

STANDARD FEATURES

PN:

Camera

Table Top Vision System

CUSTOMER SATISFACTION……. “Whatever it takes”

Fixtures & Inspection Slide

Software

► RTP Analysis

The CTI Pin Inspection System is a PC based vision system

specifically designed to measure true position of multiple types

system like this for 10 years. It finally exists!”

Options

► CTI Vision System can be integrated in to

pins on any type of connector. The advantage of this system is
its ability to store and evaluate an unlimited number of models
for performing pin searches. It is designed to perform 100% pin
inspections of every connector tested. This is possible using high
speed pattern search algorithms operating on multiple threads.
The system automatically evaluates all models programmed for
each pin, chooses the best models for final evaluation, and
determines pin location to sub-pixel accuracy. The software is
designed to be extremely simple to operate and program. A pin
model can be added to the library within a few seconds. The
system is capable of storing / transmitting traceability data for
each pin of every connector tested. A customer who has already
purchased multiple units commented, “I have been searching for

VS-TT

►Extruded table top stand with light shield cover
►Slide block for component positioning under camera.
►Camera, lens and top side light bar.
►PC with monitor and keyboard
►Measures true position of multiple type pins on any type of connector
►100% Pin Inspection

►Customized per Application

►Unlimited number of models

Automated systems.

►Bottom side lighting
►Interchangeable parts nest.