22
PN: SHC-(LENGTH)I
SHUTTLE CONVEYOR SMTS
STANDARD FEATURES:
• Floor Level Shuttle Used to Merge Products
Between Parallel Lines
• Conveyor Movement Within Shuttle is
Accomplished Using a Linear Slide for
Precise Positioning
• Pneumatic Cylinder Used for Conveyor
(Servo Optional)
• Totally Enclosed for Safety with
Interlocked Doors
• Access Doors on Top
• PLC Controls with SMEMA Cables
• Board Edge Clearance = .100”(.060”min)
• Hand Crank Width Adjust = 2.0” - 16.0”
• 1/2”Steel Welded Frame
• Shuttle Strokes Up to 212”
OPTIONS:
• 18”x 20”, 21”x 24”, 24”x 28” PCB Capability
• Light Tower for Indicating Operating Status
• Speed Control
• Fixed Rail Transfer
• High Speed (Cycle Time Varies with Length)
• Multiple Conveyor Drive Sections
• Auto Width Adjust
• 32”Line Height
• Flat Belt Conveyor
• Dual Conveyor Heads
PCB Size Min: 2.0”x 4.0”
Max: 16.0”x 18.0”
PCB Heigh
t 37.5 Inches + 2”
Air Requir
ement .5 cfm @ 65 PSI
STANDARD SPECIFICATIONS:
Power Requirement 110 VAC, 15A
C
ycle Time Pnuematic 1.5 ft./sec.
Std.Servo 1.5 ft./sec.
HS Servo 3 ft./sec.
23.625"
7.000"
37.500"