Conveyor Technologies RVC-1M-3-LT User Manual

PCB Size Min: 2.0”x 4.0”

Max: 16.0”x 18.0”

PCB Heigh

t 37.5 Inches + 2”

Air Requir

ement .5 cfm @ 65 PSI

P

ower Requirement 110 VAC, 15A

C

ycle Time 6-15 Seconds

STANDARD SPECIFICATIONS:

5

PN: RVC-1M-3-LT

REJECT VERTICAL CONVEYOR SMTS

STANDARD FEATURES:

This unit is an economical way to remove rejected
PCBs after an optical inspection machine.

• Stores 2 Rejected PCBs While Allowing the
Line to Continue

• Board Edge Clearance = .100”(.060”min)

• Hand Crank Width Adjust = 2.0”– 16.0”

• Front Access Doors for Removing Reject PCBs

• Totally Enclosed for Safety with
Interlocked Doors

• Dual Linear Slides are Used for Precise
Positioning of the Conveyor

• Pneumatic Cylinder Used for
Vertical Movement

• PLC Controls with SMEMA Cables

• Light Tower for Machine Status

• Emergency Stop Push Button

OPTIONS:

• Speed Control

• Warning Light Alarm

• Mounting Brackets for Adjacent Machines

• 18.0”x 20.0”PCB Capability

• Auto Width Adjust

36.000"

39.370"

(2) SECTION

CONVEYOR

(BUFFER)

(1) SECTION

CONVEYOR

(PASS THROUGH)

6.750"

RED=2 FAILED PCB'S
YELLOW= 1 FAILED PCB
GREEN= NORMAL

60.000"

37.500"

TRANSFER

HEIGHT