Conveyor Technologies FL-24I User Manual

PCB Size Min: 2.0”x 4.0”

Max: 16.0”x 18.0”

PCB Heigh

t 37.5 Inches + 2”

Air Requir

ement .2 cfm @ 65 PSI

P

ower Requirement 110 VAC, 15A

C

ycle Time 11 Seconds

STANDARD SPECIFICATIONS:

25

PN:FL-24I

FLIP STATION SMTS

STANDARD FEATURES:

• Single Flip per Cycle

• Pneumatic Cam Drive for Rotation

• Pass Through Mode

• Totally Enclosed for Safety with
Interlocked Doors

• Access Doors on Front and Top with Access
Panel on Back

• PLC Controls with SMEMA Cables

• Board Edge Clearance = .125”

• Hand Crank Width Adjust = 2.0” - 16.0”

• 1/2”Steel Base Construction

• Safety Sensors Located at Entrance and Exit

OPTIONS:

• 18”X 20”, 21”X 24”, 24”X 28”PCB Capability

• Light Tower for Indicating Operating Status

• Speed Control

• 32”Line Height

• Auto Width Adjust

35.500"

42.250"

6.500"

24.000"

47.750"

37.500"