Conveyor Technologies COMPONENT VERIFIER User Manual

COMPONENT VERIFIER DESCRIPTION

HIGH SPEED COMPONENT VERIFIER

PN:

► Conveyor with stops and edger’s for positioning product

CUSTOMER SATISFACTION…………“Whatever it take s”

STANDARD FEATURES

OPTIONS

► Reject Conveyor for touch up / Inspection.

The CTI Component Verification machine’s function is Inspection of critical
components on an assembly.

It was developed to check part numbers o n high lead count QFP’s prior t o
reflow to catch parts that were loaded incorrectly into the pick and place
machine by an operator.

Once in production, it was evolved to do much more. It uses PCB fiducials to
get an accuracy fix on its targets, then it is ready to inspect for missing parts,
check for correct part numbers on components, check bar code label, check for
components skew, and inspect for correct parts in given locations.

Programing is point and click. Simply insert a known good product,
jog the camera over the area of interest and press teach. Programing
can also be done off-line from DXF or script.

Precision movements are accomplished using servo drives and precision THK
ball screws.

The front of the machine has front opening door and a sliding top to allow the
operator full access to the work area.

► Light tower with alarm
► Interface to send results to customer’s database
► Three Axis closed loop servo gantry control (X/Y/Z)
► Component inspection camera also reads fiducial and

barcode labels

► Easy teach programming
► Steel welded frame

CV-1M

Gantry

System Type

Closed loop Servo ( 3 axis)

X/Y/Z Speed

Programmable, 750 mm/s max

X/Y/Z repeatability

+/- .025 mm

Positional resolution

.005 mm

Work Area

480mm (W) x 520mm (L) x 100mm

Typical Cycle Time (12 reads)

24 Seconds

Gantry Head

Camera

GigE

Programmable Z-axis

Yes

Fiducial correction

Yes

Bar code reader

Yes

Conveyor

Conveyor Type

Edge Belt

Edge clearance

3mm

Max width

480mm (18 Inches)

PCB Stop

Yes

PCB edge clamp

Yes

Conveyor Speed

Variable (10-25 M/s)

Conveyor Height

940mm +/- 50mm

Compatibility

SMEMA

Product weight

15 pounds

Facilities

Footprint

1000mm width X 1100 mm depth

Power

200/240 VAC – 10 Amp

Air Supply

610 kPa (90 psi) @ 4 CFM max

Programming

Hardware

Industrial PC

Operator Interface

15 inch touch screen

Software

Windows based CTI inspectware

Teach By Camera

Yes

Off line programming capable

Yes, from DWG/DXF or stitched image

General

System weight

425Kg

Frame Construction

Steel welded

SPECIFICATIONS

HIGH SPEED COMPONENT VERIFIER

CUSTOMER SATISFACTION…………“Whatever it take s”