Kawasaki ZX-14R (2006+)
Bike Specific Install Notes and Tips
This is an aftermarket product that fits up different than the stock components, therefore, the ins taller may be required to
set up components and to route lines in the ?best way pos s ible?, which may not always be lis ted on this ?Bike
Specific? ins tallation sheet. In any case, the ins tallation mus t allow the handlebars to reach both steering stops , with
out pulling taught or kinking any lines, and without dam aging any part of the motorcycle
Important Installation Conside rations
Cyclops Clamps fit on top of the triple clamp which requires raising the forks
about .5". No rise with the stock brake line.
Special Kit Re quirements/Installation Tips
1. Contact - Slight fairing contact is ok as long as the steering stops can be
reached with out damaging the fairing
2. Cyclops Clamps - are to be mounted on top of the triple clamp
3. Cyclops Clamps - Flipping the clamps upside down from what is in the
instruction book, may offer more convertibility and better fitment.
Recommended Riser Trim Length
1. 5.0" Riser Length = Trim Number 8
Recommended parts and re placement line s
1. Hydraulic Brake Line = Stock + 5"
Loading...