
CONVERTIBARS INSTALLATION INSTRUCTIONS
MOTO GUZZI V-11 SPORT
CONVERTIBARS by INVEX CORP.
275 e. 4TH STREET #750
SAINT PAUL, MN 55101

STEP 1. Remove the stock bar ends by taping over the bar ends using racers tape to
protect the finish. Hold the bar end using a vise grip type pliers and a 5mm Allen
wrench to remove the bar end.
STEP 2. Using a 24mm wrench remove the end cap plug.
STEP 3. At this time cover the tank to protect it from scratches and remove the left grip
and controls from the stock clip on bars.