Converters.TV Ultimate XP Operation Manual

PC VGA to T V Video C o nverter -

Ult imate X P ID# 519

Operation Manual

Introduction

Features

PC VGA to TV Video Converter - Ultimate XP is a VGA to Video
converter allowing your PC images to be viewed on a standard TV screen,
or recorded using VCR's or DVD's. The unit supports resolutions up to
UXGA (1600x1200) and can be output via Composite or S-Video and by
RGB (Scart) connections.

The PC VGA to TV Video Converter - Ultimate XP is ideal for
Professions like Advertising, Academic Lecturers, Retail Businesses or
just for Home use, the PC VGA to TV Video Converter - Ultimate XP has
simple and easy to use controls.

• Plug and Display design. No PC software drivers required.

• Power supplied from the PC's USB or PS/2 ports.

• Simultaneous display on PC VGA monitor and standard TV.

• Supports CV, SV or RGB (Scart) video outputs (switch selectable).

• Easy to use Panel Buttons: Menu (OSD), PAL/NTSC select, Power

on/off, Zoom in/out, Fine tune and Save.

• OSD Menu allows control of: Freeze frame, Horizontal/ Vertical

Size, Brightness, Contrast, Hue, Saturation, Flicker, OSD Color
and Reset.

• Full Remote Control supports above functions.

• Last Setting Save at switch Off/On.

• 24 Bit, True Color Digitizer.

PC Display Modes
& Resolutions

• VGA Display Mode: 640x480, 800x600, 1024x768, 1280x1024,

1600x1200 (also 1152x864 & 1280x960).

• MAC Display Mode (MAC G4, G4 Cubic, G3): 640x480,

832x624, 800x600, 1024x768, 1152x864.

• Apple Display Mode (iMAC and iMAC DV): 640x480, 800x600,

1024x768.

Operating Functions

and Controls
Front Panel

The following section shows the function of controlling the PC VGA to

TV Video Converter - Ultimate XP. Refer to Figure 1 for the Outline of

the PC VGA to TV Video Converter - Ultimate XP.

Connectors

Buttons

Fig. 1

1. DC IN : Plug with USB or PS/2 power cable.

2. VIDEO OUT : Connects ULTIMATE XP to the VIDEO input of

TV , VCR or Video projector.

3. S-VIDEO OUT : Connects ULTIMATE XP to your TV , VCR or
Video projector supporting the S-VIDEO input.

4. RGB OUT (SCART) : Connects ULTIMATE XP to the RGB
input of TV - VCR or Video projector.

5. SCAN CNVTR : Connects Y Cable among PC, ULTIMATE XP
and monitor.

6. CVBS/RGB Switch: Slide to RGB side, only RGB OUT connector
has function, slide to CVBS side, only S-OUT and VIDEO OUT
connector can output signal.

1. POWER : Toggle between power on & off.

2. SAVE : Press this button to save customer setting.

3. PAL/NTSC : This button selects the video standard. Which

includes the following six video standards, "NTSC, NTSC-EIAJ,
PAL-M, PAL-N, PAL, PAL combination N". The refresh rate of