Converters.TV ID 859, 859 Operation Manual

HD/SD Digital AV Mixer

- ID# 859

Operation Manual

Introduction

This high definition HD/SD digital AV Mixer. Each input BUS supports 6 inputs (2
x HDMI, 2 x Component, 2 x S-Video and Composite video) and also

Background Color for special efficiency. The output supports 1 x HDMI, 2 x
Component, 2 x S-Video and Composite video, it also supports position
adjustment and recording.
The output supports HD/SD resolution for example, NTSC, NTSC-4.43, PAL, PAL-M,
PAN-N, SECAM, 480p, 576p, 720p 50/60, 1080i 50/60.
The output resolution can auto adjust to consistency resolution, please refer to the
diagram on the right side.

Features

● Selective size and position for digital effects area and PIP windows.

● Automatic fade and wipe with speed preset control.

● Digital effects- Still,Mosaic,Paint,Negative.

● 96 wipe patterns.

● Chroma key & Luminance key.

● High Picture Quality.

● 3x8 back color.

● Joystick control for digital effect position.

● Fade control for Video and Audio.

● Video and Audio mixing.

● Two HDMI source inputs.

● Two Component source inputs.

● Two Composite and S-Video source inputs.

● One HDMI recording outputs.

● Two Component recording outputs.

● One Composite and S-Video recording outputs.

● One Composite and S-Video preview outputs(OSD).

● Auxiliary audio input.

● Microphone input and headphone output.

● Picture in Picture control.(3 window sizes)

● Each A/B BUS can adjust the Contrast / Brightness / Color / HUE / Detail &

Aspect Ration.

● Supports Lip-Sync delay up to 170ms.

● Composite supports 3D comb filter and YC separation.

● Motion and Edge Adaptive De-interlacing.

● Note: When receiving content that has HDCP encryption there will be no video

output except for HDMI output port.

Major Operating Controls and Their Functions

n POSITION/TIME

1. Time Control

For adjusting the transition time of Auto Fade function and Auto take
function.

2. Joystick control

This joystick control has two functions controls the position of the Square
wipe pattern and P-IN-P picture.

n FUNCTIONS

3. One-way wipe button.

4. Reverse wipe button.

5. Multiple wipe button.

6. Straight wipe button.

7. Split wipe button.

8. Corner wipe button.

9. Diagonal wipe button.

10. Triangle wipe button.

11. Square wipe button.

n MODE CONTROL

12. Wipe button

For selecting the wipe effect.

13. PIP button

Picture in picture mode can be selected by pressing this button.

14. Mix(Fade) button

Press this button to select the fade In/Out mode.

15. KEY button

This button allows you to tune in a best performance point for the blue key
and luma key effects.

16. EDGE button

Press WIPE button, can select sharp edge / soft edge or color edge.

18. COLOR button

Press color edge, can select eight different color of frame.

n DIGITAL EFFECTS

18. A-bus digital effect ON button.

19. A-bus Still button and osd left adjust.

20. A-bus Paint button and osd right adjust.

21. A-bus Negative button and osd up adjust.

22. A-bus Mosaic button and osd down adjust.

23. B-bus digital effect ON button.

24. B-bus Still button.

25. B-bus Paint button.

26. B-bus Negative button.

27. B-bus Mosaic button.

n ADJUST

28. Adjust button

When LED switched off, the SDP review output side will show AB-bus / output source
and output format. When LED illuminate, the suer can press 19, 20, 21 and 22 buttons to
adjust the values.

29. DEMO button

When LED illuminate, the auto DEMO will switch to ON and the system will auto
sequence Demo 96 wipe patterns, press 1 TIME button to adjust the auto
sequence.

30. SCAN button

Press SCAN button for 3 seconds, the system will enter into SCAN function and
will SCAN the input ports from 1 to 6 and record each port's format to the system.

n VIDEO SOURCE SELECT