Converters.TV HDMI v1.3 over CAT6 Distributor, 745 Operation Manual

HDMI v1.3 over CAT6
Distributor 8 out ID #745
Operation Manual
Introduction
Applications
System Requirements
The HDMI v1.3 over CAT6 Distributor 8 out splitter when used with HDMI to CAT6 transmitter it will allows user to distribute a HDMI source to 7 HDMI displays located 40 meters away through two CAT6 cables. This solution provides a direct input of one CAT6 to a looped output of CAT6 and 7 HDMI outputs – a smart way to link and display a single source to 8 different screens simultaneously. Alternatively, the CAT6 output can also be treated as an extender to connect to another CAT6 splitter or cascade with other unit in multiple layers. This unit allows user to transmit HDMI signal via CAT6 without compression over long distance. The CAT6 to HDMI splitter also incorporates functions like EDID, System Reset, Deep color and IR systems.
One CAT6 extension source with multi HDMI displays and one CAT6 loop
through output
Home entertainment integrationMulti-task project presentationShowroom DisplayAdvertising display controlSystem installation control
Need to work with a HDMI to CAT6 transmitter on the other end.Output display device(s) with HDMI cables and or CAT6 to HDMI receiver
with HDMI cable to display.
Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant
Deep color video up to 12bit, 1080p@60HzOne CAT6 source connection to one CAT6 and seven HDMI - allowing
users to link up to eight displays simultaneously
HDCP keysets allows each output to work independently when
connecting to a HDMI display
Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz Fs sample rate)
Supports a wide range of PC and HDTV resolutions from VGA to SXGA
and 480i to 1080p.
Selects EDID from TV mode or STD mode (this splitter)Deep color setting of 8 bit or 12 bitIR remote controlSystem Reset functionCEC Bypass
Loading...
+ 4 hidden pages