Converters.TV CCQ-30 Operation Manual

Security System Colour Quad

Processor

(CCQ-30)

Operation Manual

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, [e-mail]

Phone [phone] Fax [phone]

www.converters.tv

Introduction

This unit can receive, display and record video signals from 8 different NTSC/PAL video
systems at the same time. With a built-in time base corrector (TBC), no special camera
equipment or synchronization is needed.

Precautions

1. Do not expose this product to direct sunlight.

2. Keep the unit away from radiator, heat sources and magnetic field.

3. Do not place it in very dusty or humid locations.

4. Use this unit in a horizontal position only.

5. Do not put heavy objects on top of the converter.

6. Put the unit in an open space that has good ventilation.

7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.

8. Unplug the unit from the power supply when it is not to be used for a long period
of time.

Features

• Eight color camera outputs can be combined into 2 pages of real-time color quad

TV screen for simultaneous monitoring, displaying and recording.

• Real time refresh rate with high resolution, 720x480 (NTSC), 720x576 (PAL).

• Digital image processing; 60 (NTSC) fields/sec. or 50 (PAL) fields/sec.

selectable.

• 2 x 2 playback zooming.

• Built-in sequential switcher with adjustable dwell time.

• Alarm detection for video loss and sensor contact closure.

• Built-in buzzer, ON/OFF switch for acknowledging the alarm detection.

• On screen TIME, TITLE display, and on screen setup menu.

• Built-in time base correction does not require special cameras or external

synchronization.

• Automatic programmable alarm on each channel. Adjustment controls for

CONTRAST, BRIGHT, COLOR, TINT (NTSC only) on each channel.

• Compatible with both NTSC and PAL systems.

• Video auto gain control for each channel input.

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, [e-mail]

Phone [phone] Fax [phone]

www.converters.tv

Operation controls and functions

Front Panel

1. Power- This is the On/Off power indicator light. It will illuminate when the power
has been turned on.

2. Zoom/Reset- This button provides two functions: LED indicator lights up under
normal operation and 2 x 2 zoom display, combination with button activates 4
channels selection to zoom or freeze mode.
During menu set-up, pressing this button resets the previous adjustment to their
default value; while pressing the button continuously for 4 seconds resets all the
parameters to their default values.

3. Auto/Zoom F- Led indicator will light up under normal operation and perform auto
sequential switching.

A B

a) The internal default-

b) When the interval setting is ON, the switching sequence is as follows:

A CH-1 CH-2 CH-3 CH-4 B Ch-5 CH-6 CH-7 CH-8

4. “-/A-B switch control”-

a) A/B switch control: LED indicator OFF display CH1~CH4 of page A; while

LED indicator ON display CH5~CH8 of page B.

b) During screen set-up, this key activates as “-“ key.

5.

:

A. During function set-up, LED indicator lights up on button for full screen display
on each channel; pressing the button again turns off LED indicator and reverts back to
quad screen display.

Please browse our online catalogue to view our full product range.

44-48 Maitland Road, Mayfield East, NSW, 2304 Australia, [e-mail]

Phone [phone] Fax [phone]

www.converters.tv