Converters.TV 998 Scan converter Operation Manual

Component & PC to Composite Video

Scan Converter - ID# 998

Operation Manual

Introduction

The Component & PC to Com posite Video Scan C on ve rter is
designed to down scale Component and PC VGA signal s to an
analog C om posite Video NTSC or PAL signal. Sup porting SD/HD
Componen t input from 480i/p to 1080i/p and PC resolutions VGA up
to WUXGA@60h z, this scan converter scales down to either SD PAL or
NTSC video for CV (yellow plug) connection to SDTV's. This allows for
newer technology equipmen t to be connected to ol der style TV's.
With m any functions such as 3D noise reduction, frame rate
conversi on (PAL/NTSC), adaptive contrast enhan cement , overscan &
underscan, aspect ratio sel ection, OSD menu co ntrol and no software
required, this unit is ideal for commercial or private home use.

The Component & PC to Com posite Video Scan C on ve rter uses a
standard 15/ 15 pin D-sub cabl e or a 15 pin D-sub to 3 RCA Plug cabl e
for connecti on to the s ou rce equipment. Use a yellow plug RCA
cabl e for connection from the converter to the Composite Video
input of you r TV. Audio (L/R red and white) is connected directly from
the source audio output to the TV's CV audio input. Power is supplied
from a 5vDC source. LED l ight indicates status of power and output
PAL or NTSC video signal.

NO TE :

• Not support interlace source signal conversion between 50/60Hz

• Not support 480i and 1080i@60Hz to PAL frame rate conversion

• No t support 576i and 1080i@50Hz to NTSC fram e rate conversion

Applications

System
Requirements

Features

• Security camera display or DVD/Game Console

• Displaying Component or PC signal on the CRT display

• Displaying Component or PC signal on the LCD display

Input source equipment such as VGA/Component camera (RGBHV/YPbPr)
signal with D-Sub 15pin or component adapter cable and output to TV with
CVBS input jack and RCA connection cable.

• Converts video signal from PC/Component source to NTSC or PAL signal

• Accepts a wide range of Component input resolution from 480i/p to
1080i/p@60Hz and PC from VGA to WUXGA@60RB

• 3D noise reduction in both temporal and spatial domain

• Frame rate conversion (PAL/NTSC)

• Adaptive contrast enhancement

• OSD Display

• Overscan and underscan adjustment

• Phase and Aspect adjustment

• No software installation require

• Compact and elegant design

Operating Functions
and
Controls

Top Panel

1. MENU Button (Hold): Press this button for 1 second to bring up the OSD
which will display the input timing and output TV system information.

While the OSD is still displaying press the button again for 5 seconds to
switch to second tier OSD menu where changes can be made for e.g.
output TV system from NTSC to PAL or from PAL to NTSC, Overscan,
Underscan, Aspect ratio etc. (Press the button to sequentially select the
desired parameter to be set.)

2. Power LED: This LED will illuminate in RED when the power supply

is connected.

Input Port
PC VGA
Component Y/Pb/Pr

Output Port
Composite Video

1. PC IN: Connect to source equipment such as PC, laptop or
digital camera with a D-sub 15pin output using a standard 15 pin D­sub VGA cable.

1. Component In: Connect to source equipment such as
DVD/VCR/PVR player with a D-sub 15 pin to 3 RCA cable.