Converters.TV 995 Operation Manual

HDMI Transmitter & CAT6

Receiver with IR - ID# 995

Operation Manual

Introduction

Applications

Features

The HDMI 1.3 transmitter and receiver is the right way to send your HDMI
signal over long distances. Instead of using expensive HDMI cables, this
device lets you use your existing CAT 6 cables/sockets while also
performing the same functions like transferring Deep Color (12 bits/color)
video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio, all with a bandwidth up to 225MHz.
And if that weren’t enough, you can use your existing remote to control
your device from over 30/45 m away through an IR blaster. If your
looking for a way to extend an HDMI signal, then the HDMI 1.3
Transmitter and Receiver is what you have been searching for.

 Showroom display
 Window display
 Home or individual display
 Commercial display
 Lecture room display

 Compliant with HDMI 1.3, HDCP 1.1 and DVI1.0 standards.
 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/

color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS­HD Master Audio) Digital audio .

 Supports CAT-6 cables for data/DDC transmission.
 Equalizes and recovers incoming TMDS data before re-transmitting

it in high quality, regardless of the incoming signal quality.

 Supports high definition resolution,
 Cable distance testing showed that with 1080p/8bits resolution the

Input/Output source can be up to 30/45 meters away and with 1080p/12bits
resolution the I/O source can run up to 15/15 meters.

 Supports CEC bypass and xvYCC.

System
Requirements

HDMI input source equipment, output HDMI displayer, 2 x CAT 6
cables and source equipment’s remote control.