Converters.TV 865 Operation Manual

HDMI Over One CAT6

Transmitter and Receiver - ID# 865

Operation Manual

Introduction

Applications

Features

The HDMI™ Transmitter and Receiver over One CAT6 is an intelligent
device for extending your HDMI signal over long distances to a
compatible display. Instead of buying expensive, long distance HDMI
cables, your existing CAT6 cables can be utilized to perform advanced
functions, like transferring Deep Color (12 bits/color) video and high
Definition (Dolby TrueHD, Dobly Digital Plus and DTS HD Master Audio)
dgital audio, with a bandwidth up to 2.25Gbps per channel. Powered by
its USB connection which also makes it easier to install, this device is a
fine addition to existing media setups.

• HDMI signal extension over CAT6

• HDMI signal transmitting over long distance

• Supports digital video formats up to 36 bits

• Support high definition input/output up to WUXGA/1080p

• Uses one CAT6 cable for data/DDC transmission

• Equalizes and recovers incoming TMDS data before re-transmitting it in

optimal quality

• HDMI Cable testing showed that with WUXGA/1080p 8bit resolution, input/

output device can run to 12 meters away and with WUXGA/1080p12bit
resolution it can run up to 10 meters away

• When transmitting a signal in 1080p 8bit resolution the CAT6 operating

distance is 40 meters, and when the signal is in 12bit resolution the CAT6
operating distance is 15 meters

• Using only transmitter side’s power in 1080p 8bit resolution the CAT6

operating distance is 20 meters depends on source and display used

• The transmitter is powered by its USB connection while the receiver obtains its

power through the CAT6 cable. But when operating over long distances the
receiver can be connected with a USB power supply for improved
performance

System Requirements

Input HDMI signal source and output HDMI input display with HDMI
connection cables and CAT6 cable in between the transmitter and receiver .