Converters.TV 854 Operation Manual

DVI over one CAT6 Extender

- ID# 854

Operation Manual

Introduction

Features

The DVI-D Transmitter and Receiver over One CAT6 is an intelligent
device for extending your DVI-D signal over long distances to a
compatible display. Instead of searching for lengthy DVI cables, your
existing CAT6 cables can be utilized to perform advanced functions,
along with a bandwidth up to 2.25Gbps per channel. Also, the device
receives power through its USB connection, while Receiver is powered by
the CAT6 connection, which makes installing and powering the
Transmitter and Receiver more convenient. These devices are hardware
based with fast and easy installation and are perfectly suited for
common PC and notebook using.

• Supports digital video formats up to 36 bits

• Support high definition input/output up to WUXGA/1080p

• Uses one CAT6 cable for data/DDC transmission

• Equalizes and recovers incoming TMDS data before re-transmitting it in

optimal quality

• DVI Cable testing showed that with WUXGA/1080p 8bit resolution, input or

output device can run up to 12 meters away and with WUXGA/1080p12bit
resolution it can run up to 10 meters away

• When transmitting a signal in WUXGA/1080p 8bit resolution the CAT6

operating distance is 40 meters, and when the signal is in 12bit resolution the
CAT6 operating distance is 15 meters

• It is recommended to use power adaptor on both transmitter and receiver
side to get the best performance and long distance operating.

• Using power adaptor on transmitter side only, receiver side powered over

CAT6 cable, the operating CAT6 cable distance will decrease to 20 meters
or less.

Applications

System
Requirements

• DVI-D signal extension over CAT6

• DVI-D signal transmitting over long distance

Input DVI-D signal source and output DVI-D input display with DVI connection
cables and CAT6 cable in between the transmitter and receiver device.