Converters.TV 781 Operation Manual

DVI Splitter 1 in : 4 out

- ID# 781

Operation Manual

Introduction

Features

Operation Controls
and Functions

Front Panel

The DVI Splitter is a high performance HDCP compliant DVI distribution

amplifier.

It allows same DVI or HDMI signal source to split up to four identical
and buffered displays for multi-viewing purpose.

1. Built-in EDID and HDCP bypass ensures each output can be displayed

independently.

2. HDMI source and displays are compatible by using the HDMI to DVI
adaptor cable.

3. Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p.

4. Can be cascaded up to 3 layers.

5. Each of the buffered output can run up to 15 meters.

Rear Panel

1. DVI input: Connect to the DVI or HDMI output of your source equipment
such as DVD player or PC graphic card.

2. DVI output 1: Connect to the digital input of your first display.

3. Sync Led: The led will illuminate when the source signal is connected.

4. Power input: Plug the supplied 5VDC power supply into the unit and the

led will illuminate when connected.