Converters.TV 757 Operation Manual

1 by 2 HDMI v1.3 Splitter

- ID# 757

Operation Manual

Introduction

Application

System
Requirements

Features

This HDMI v1.3 Distribution Amplifier is an incredibly useful solution for your HDMI
signal distributing needs. From a single HDMI source you can transfer Deep
Color (10-bit and 12-bit) video and a new lossless compressed (Dolby TrueHD,
Dolby Digital Plus and DTS-HD Master Audio) digital audio with high bandwidth
up to 225MHz (6.75Gbps) to two HDMI outputs. Besides splitting and distributing,
it also does signal amplification and equalization, providing high I/O
performance on both audio and video.

 Simultaneous display one HDMI source on 2 TVs
 Show room display control
 Educational demo
 Installation usage

 Input source equipments with HDMI output connector(s)


Output displays with HDMI input connector(s)

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver .
 Deep color video up to 12bit, 1080p@(24/60)Hz.
 Simultaneously displays one HDMI source onto eight HDMI displays.
 HDCP keysets allow each output to work independently when connecting

to an HDMI display.

 Allows a single HDMI source to be shown on two displays without any

signal loss.

 Supports DVI source/display via HDMI to/from DVI adaptor cable.
 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate).

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA

and 480i to 1080p.

 HDMI cable distance testing showed that with 1080p/8bits resolution: the

Input/Output source can reach up to 10/10 meters away, and at 1080p/12bits
the I/O source can reach up to 6/10 meters.

Note:

A. Cable tested with CAT-6E /23AWG/ using cables of another type may result
in a different operating distance.
B. Cable distance test included the following: PS3 120G and 37" Samsung
12-bit LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display use with cable specification.

 Supports EDID bypass, xvYCC and CEC bypass.
 CEC function support includes one touch play & record, timer

programming, menu language, deck & device menu control, OSD display,
device OSD transfer, remote control pass through, system audio control and
system standby

 System standby will only be actived when the last TV is switched to

standby