Converters.TV 662 Operation Manual

DVI to P C C onverter

ID# 662

Operation Manual

Introduction

Features

Converts a DVI-D Digital signal input to Analog PC/RGB or HD YPbPr output. It
enables you to connect a digital DVI source to an analog PC monitor, projector or
TV. Its high bandwidth capability supports a wide range of PC and HDTV
resolutions. Can be used easily for Professional and Private applications.

The unit is extremely small and easy to set up. Connect the DVI-D input port to the
DVI output port of your device such as a DVD player or set top box. Then connect
the output port to the PC/YPbPr input of your device such as an analog PC monitor,
projector or TV.

The unit has a switch which lets you select the correct output. Set the switch to
RGB when your DVI source device is a PC graphics card or other digital RGB
source signal. Set the switch to YPbPr when your DVI source device is a DVD
player, set-top box, or any other high definition digital video source.

● Supports DVI-D input and Analog PC/RGB or HD YPbPr output.

● Supports output selection between YPbPr and RGB.

● Supports input/output resolution as below:

PC: 640x480= VGA59 , VGA60, VGA72, VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864=MAC70, MAC75, MAC85
1280x1024= SXGA60, SXGA75, SXGA85,
1600x1200= UXGA60
1920x1200= WUXGA60(pixel-rate=154MHz)

HD: 480160, 576150, 480P60, 576P50, 720P60, 720P50, 1080160,

1080150, 1080P30, 1080P60, 1080P50

Note:

1. Due to the IC didn't support Tri-level synchronies output. So

component output at 720p/1080i/1080p, the image will shift tothe
left side of the screen.

2. If DVI source includes HDCP(High-bandwidth Digital Content
Protection), DVI display should not support HDCP decryption.

● Built-in EDID.