Converters.TV 661 Operation Manual

HDMI to PC/HD Converter

ID# 661

Operation Manual

Introduction

Features

HDMI to PC/HD Converter converts Digital HDMI input to Analog PC/RGB or
SD/HD output. It enables you to connect a HDMI source to an analog PC
monitor, projector or TV. Its high bandwidth capability supports a wide range
of PC and HDTV resolutions. Connect to your monitor via VGA or Component
input for display. Ideal for Business and Private applications.

The unit is extremely small and easy to set up. Connect the HDMI input port to
the HDMI output port of your device such as a Blu Ray player or set top box.
Then connect the output port to the PC/YPbPr input of your device such as
an analog PC monitor, projector or TV.

The unit has a switch which lets you select the correct output. Set the switch
to RGB when your HDMI source device is a PC graphics card or other digital
RGB source signal. Set the switch to YPbPr when your HDMI source device is a
Blu Ray player, set-top box, or any other high definition digital video source.

 Supports HDMI input and Analog PC or SD/HD output.
 Supports output selection between YPbPr and RGB.
 Supports input/output resolution as below:

PC: 640x480= VGA59 , VGA60, VGA72, VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85

1152x864= MAC70, MAC75, MAC85

1280x800= WXGA60
1280x1024= SXGA60, SXGA75, SXGA85,
1440x900= WXGA60
1600x1200= UXGA60
1680x1050=WSXGA+60
1920x1200= WUXGA60(pixel-rate=154MHz)
HD: 480I60, 576I50, 480P60, 576P50, 720P60, 720P50, 1080I60, 1080I50,
1080P60, 1080P50

Note:

1. Due to the limitation of Tri-level synchronies output
the image will shift to the left side of the screen when
component output at 720p/1080i/1080p.

2. If HDMI source includes HDCP(High-bandwidth Digital
Content Protection), output display is not support
HDCP decryption and no image will display.

 Build in EDID.
 HDMI 1.3 Compliant.