Converters.TV 559 Operation Manual

HDMI to HDMI Switch

2 input - 10 output ID# 559

Operation Manual

Introduction

Features

The HDMI to HDMI Switch 2 input - 10 output is the most advanced
solution to HDMI signal distribution. This product is compatible to HDMI
v1.3 specifications, a cutting-age technology which defines the support to
transfer Deep Color (10-bit and 12-bit ) video and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
digital audio, with a high bandwidth up to 225MHz (6.75Gbps). Besides
splitting and distributing, the HDMI to HDMI Switch 2 input - 10 output also
does signal amplification and equalization, so as to provide high
performance I/O of audio and video. Each of the buffered output can
run up to 30 meters and can be cascaded.

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
 Deep color video up to 12bit, 1080p@60Hz.
 Two HDMI source to connect to ten HDMI display simultaneously.
 HDCP keysets allows each output to work independently when

connecting to a HDMI display.

 Splits a HDMI source up to ten output without signal loss.
 Supports DVI source and DVI display by using HDMI to/from DVI

adapter cable.

 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA

and 480i to 1080p.

 HDMI cable distance test with 1080p resolution: Input/Output source

can run up to 30M/5.1CH.

 Full HDCP Compliant.

Operating Functions

and Controls
Front Panel

1 Remote Control Sensor.
2 Key Lock: Press and hold the "Key Lock" button for 5 seconds the system

will enter into Key Lock mode. When the system in Key Lock made the Key
Lock LED will illuminate and all buttons will not function.
3 HDMI/DVI Indicator: The LED will illuminate when the selected HDMI input
source is originally from an HDMI output, the LED will illuminate when the