Converters.TV 231 Operation Manual

Multisystem TV Tuner

- ID# 231

Operation Manual

Introduction

Features

Operating Functions
and
Controls

This unit is a multisystem tuner that receives terrestrial and cable TV
broadcasting systems of all PAL and SECAM countries.

• Receive terrestrial and cable TV broadcasting systems of all PAL and

SECAM countries.

• Full channels on TV/ CATV systems.

• Operates in 12V DC car voltage. Ideal for car video application.

• Two video outputs.

• Auto programming and channel memory.

• PLL frequency synthesizer and auto fine-tune ensures best receiving picture.

• Remote out connector allows you to place the IR sensor to anywhere you

want it to be, whether in a car, a boat or in your home.

Front Panel

1. RF In- This is the RF Input port. Connect the port to your Antenna or
Cable TV.

2. DC In- DC 12V In. This is the DC Input port.

3. ACC- If +ACC is used: When the +ACC wire is connected to the power,

TV tuner is switched On. If +ACC is not used: Press and release the power
button of remote control, this will have the same effect as the +ACC
function (Turn On the tuner).