Converters.TV 1 by 8 HDMI to CAT6 Splitter, 743 Operation Manual

1 by 8 HDMI to CAT6

Splitter ID #743

Operation Manual

Introduction

Applications

System
Requirements

The 1 by 8 HDMI to CAT6 1.3 splitter when used with CAT6 to HDMI receivers it will
allows user to distribute a HDMI source through CAT6 cable over 45 meters. This
solution provides a direct input of one HDMI to a looped output of HDMI and 7
CAT6 outputs – a smart way to link and display a single source to 8 different
screens simultaneously. Alternatively, the HDMI output can also be treated as an
extender to connect to another HDMI splitter or cascade with other unit in
multiple layers. This unit allows user to transmit HDMI signal via CAT6 without
compression over long distance. The HDMI to CAT6 splitter also incorporates
functions like EDID, System Reset, Deep color and IR systems.

 One HDMI extension source with multi CAT6 to HDMI displays and one

HDMI loop through output

 Home entertainment integration
 Multi-task project presentation
 Showroom Display
 Advertising display control
 System installation control

 Input source equipment(s) with HDMI Cable(s).
 Output display device(s) with HDMI cables and or CAT 6 to HDMI receiver

with HDMI cable to display.

Features

● HDMI 1.3, HDCP1.1 and DVI1.0 compliant

 Deep color video up to 12bit, 1080p@60Hz
 One HDMI source connection to one HDMI output and seven CAT6 to

HDMI - allowing users to link up to eight displays simultaneously

 HDCP keysets allows each output to work independently when

connecting to a HDMI display

 Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission (32-192kHz Fs sample rate)

 Supports a wide range of PC and HDTV resolutions from VGA to SXGA

(1280 x 1024) and 480i to 1080p.

 Selects EDID from TV mode or STD mode (this splitter)
 Deep color setting of 8 bit or 12 bit
 IR remote control
 System Reset function
 CEC Bypass