Converters.TV 15340 Operation Manual

HDMI to CV/SV Scaler with HDMI Bypass

(Apple Compatible) - ID# 15340

Operation Manual

Introduction

Features

The HDMI to CV/S-Video Converter is designed to convert the digital signal from HDMI
(or DVI) source to analog signal of NTSC or PAL system, with L/R stereo audio. As well as
S-Video and Composite video outputs, it also provides an HDMI bypass output to
deliver the original signal, and a Coaxial output to send S/PDIF digital audio to an
amplifier. Not only these, the device also has manual selection of underscan and
overscan on output image to ensure the screen best fit for viewer’s pleasantation. And,
the model has a special Apple Mode switch which allows user to use Apple TV or other
Apple devices as source equipment.

• HDMI, HDCP and DVI compliant

• Converts video signal from HDMI source to NTSC or PAL signal (selectable)

• Converts digital audio from HDMI source to analog stereo audio

• Accepts a wide range of HDTV input resolutions, from 480i to 1080p@60Hz and

PC from VGA@60Hz to WUXGA@60Hz (RB)

• Supports Coaxial input audio sample rate 44.1KHz, 48KHz and 96KHz

• Output image overscan or underscan switch ensure best fit on screen

• Apple Mode switch guarrantees the use of Apple devices

Applications

System
Requirements

• HDMI to Composite Video or S-Video signal conversion

• HDMI to NTSC/PAL system conversion

• HDMI to SD resolution for recordgin/monitoring

Source equipment such as PC/Laptor or HDMI camcorder and display devices such as
TV/monitor with HDMI connection cables.

Operation Controls
and Functions

Front Panel

1. PAL/NTSC Switch: Select the required format for output display.

2. UnderScan/OverScan Switch: Select the required screen for output display.

3. STD/Apple Switch: Switch to Apple mode when the connected HDMI source

equipment is an Apple device (such like Apple TV), otherwise, switch to STD mode.

4. LED: The yellow LED will illuminate when Apple Mode is selected, and the green LED

will illuminated for STD mode.

5. USB: This slot is reserved for firmware update only.

6. HDMI IN: Connect to the HDMI output of a source equipment such as an

PC/Laptop or HDMI camcorder.

7. 5V DC & Power LED: Connect the 5V DC power supply into the unit and plug the

adaptor to AC wall outlet. The LED will illuminate when power supply is
connected.

Back Panel

1. R/L OUTPUT: Connect to active speaker with RCA cables for sychronize video output

with HDMI, S-Vide or Composite video.

2. COAX OUTPUT: Connect with active speaker wor amplifier with coaxial cable for

sychronize video output with HDMI, S-Video or Composite video.

3. CV OUTPUT: Connect to the Composite Video input of a display or recording

device.

4. SV OUTPUT: Connect to S-Video input of a display or recording device.

5. HDMI Bypass OUTPUT: Connect to the HDMI input of a display.