Converters.TV 15208 User Manual

USB Audio Center

# 15208

Operation Manual

Introduction

Features

Applications

The Audio Center is designed to allow multiple audio sources to be controlled,
switched and output to a variety of audio equipment. With its 3 audio inputs and 2
audio outputs(including a 6.3mm headphone output) you can integrate and convert
USB/Line in audio source to LPCM 2CH output synchronously to Line out and 6.3mm
headphone.

• Supports Digital to Analog audio Conversion (DAC)

• Supports USB sampling rate up to 192kHz

• Synchronous output sound on both Line out and 6.3mm headphone

• Supports RS-232 controls

• Elegant design and easy to install/using

• Total Harmonic Distortion (THD): Less than 100dB (-20dBFs)

• Volume contol of analog and headphone outputs

• Direct power and mute button on unit

• Headphone output fades in after system is muted

• 6.3mm headphone output (3.5mm mini-jack adaptor supplied)

• Multiple input/output Audio Center

• PC/Mac USB audio input support

• Show event audio set up

• Home Theater

• Educational/Lecture presentation

System

Requirements

Input audio source equipment such as PC (USB), DVD player, MP3 and …etc.

with output active speakers, amplifier or headphones

Operation Controls
And Functions

Front Panel

1. POWER/SOURCE Select:

Press the wheel to turn on the device or to set it to standby mode. Turn the wheel
Left/Right to select input audio source (3.5mm Line-level/ Line in/ USB), the LED will
illuminate accordingly with selected input audio source.

2. 6.3mm HEADPHONE Output:

Connect to 6.3mm professional headphone set for user to enjoy the individual
professinal audio sound.

3. 3.5mm Line-level input:

Connect 3.5mm mini-jack cable to any audio equipment for stereo input audio
signal.

4. Power LED:

LED will illuminate when the Power is switched ON.

5. Input LED indicator:

The LED will illuminate according with selected input source.

6. Mute/Volume control:

Turn the wheel to adjust the volume levels. Press the wheel to Mute the audio, all the
input audio LED indicator will turn off automatically. Turn the wheel Left/Right to un­mute the audio, input audio LED indicator will illuminate to the last selection.

Rear Panel

1. DC 5V:

Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.