Converters.TV 15200 Operation Manual

Multiformat Video to USB HD

Capture Box - ID# 15200

Operation Manual

Introduction

System
Requirement

Features

The Multi Format Video to USB HD Capture Box is High Definition capture box supports HDMI
1080p video/component/SV/CVinput and record to H.264 video format. Its low power
consumption and superior video processing capabilities make it ideal for integration into high­end portable and desk top PC products

In order to run the application smoothly, please refer to the following
hardware recommendation.

• System Hardware Requirements:

2.4 GHz single core CPU with at least 1GB RAM for optimal performance

• Operating Systems:

Windows 2K SP4
Windows XP Home or Professional 32 bits SP2
Windows Vista 32 bits
Windows 7 32 bits

• USB Port Extension:

An available USB 2.0 port with USB to mini USB cable

Applications

• FullHD capture HDMI/COMP/SV/CV to USB

• H.264/MPEG4-AVC High Definition encoder

• Video input supports: 1920 x 1080i/p, 1280 x 720p, 576i/p, 720 x 480i/p

• Supports MPEG-4 Advanced Audio Coding (AAC)

• 48 KHz audio sampling frequencies

• It use USB bus power for low power consumption

• Displaying HD signal on PC or NB’s monitor

Operation Controls
and Functions

Front Panel

Back Panel

1. COMP/SV/CV IN

This slot is to connect with Composite video/S-Video/Component video input source equipment
such as Set-Top-Box or DVD with 8 pins cable.

2. HDMI IN

This slot is where you plug your input source equipment with HDMI cable for input signal
sending.

3. AUDIO IN

This slot is to connect with audio input source equipment such as DVD with 3.5mm audio cable

1. USB

This slot is where you plug the mini USB cable and connect it to the PC/NB for data upstream
and power.

2. Power LED

This LED will illuminate when the device is connected.

Installation

The following sections list the procedures to follow when installing the HDMI/COMP/SV/CV to
USB Full HD Capture. Please follow the step accordingly to launch the installation successfully.

Hardware
Installation

Connect the HDMI to USB Full HD Capture to NB/PC with mini USB to USB type A cable and

the LED will illuminate in green with a Found New Hardware message from NB/PC desk screen

A Wizard dialogue will appear, click” Yes”, and click “Next” to continue the installation

Insert the CD driver included in the package now and tick on “Install the software
automatically” then click “Next”.